Vortice extractor fans filter in comparison

Max Absorption Current (A)0.1; Rated Duct Diameter (mm)100; Frequency (Hz)50; IP Protection Grade X4; Insulation Class II; Drain Diameter (mm)99; Weight (Kg)0.6; Max Power Consumption (W)18

Extraction rate 70.8 (high speed) 50 (low speed) litres per second, 255 (high speed) 180 (low speed) cubic meters per hour

Quiet and powerful small room fan with humidity meter (automatic switch-on from 65% moisture content), timer, extremely flat front grille and integrated check valve to prevent outside air and odours

Dimensions 281mm high x 176mm diameter. 98mm diameter intake output connections 25mm deep

230 240 V AC 50 Hz power grid; timer exceeded (see important information in product description regarding electrical connection requirements)

Front panel can be easily removed without tools

Data, Safety and Performance Certified by IMQ Performance. CE Mark

IPX4 splashproof. Class II double insulated

This model incorporates a run-on timer which operates in connection with the room light switch. When the light is switched on the fan starts, when the light is switched off the fan continues to run for the pre-set period. Permanent live, switched live and neutral wires (3 cores + earth) are required at the fan position in order to function correctly.

Used to connect to an extractor fan in your bathroom or shower room when the duct passes through your loft or attic. In this situation warm air being extracted by the fan can condense due to the cold air above and result in water droplets coming back down into the extractor fan and possibly damaging it. Using this type of ducting normally solves the problem as the insulation on the duct means that the air passes through without coming into contact with the cold temperature above.

This model is designed for simple switching on off from a separate switch, e.g. light switch or spur unit (not supplied). It does NOT have a run-on timer.

2 Year Warranty