Tripod collars in comparison

The LMR-SM140S Tripod Mount Ring from Haoge is designed for Sigma 100-400mm F5-6.3 DG DN OS Lens (of Sony E-Mount or Sigma L-Mount,Fuji X Mount) It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard.

1. The tripod mount ring is designed and improved according to original factory parameters; only compatible with Nikon Nikkor Z 180-600mm F5.6-6.3 VR Lens, NOT compatible with other lenses; 2. The tripod collar bottom is added 105mm long Arca fit quick release plate feature, can be used with 39mm Arca-Swiss fit tripod head and clamp directly, more practical than lens collars without QR-Plate; 3. The quick release plate's bottom is improved with new design, which is compatible with the handheld stabilizer with the same structure of Arca-Swiss; added wavy finger positions and reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly; 4. The inner wall of the tripod ring is pasted with a layer of PVC film, and the lens ring body adopts a split structure, loosen the knob, and pull it out to unlock; 5. The tripod ring is installed in the same way as the original factory, and supports rotating vertical shooting; When rotating for vertical shooting, loosen the knob completely; there is a vertical focus point on the ring

1. This lens collar is tailor-made and compatible with Sony FE 135mm f/1.8 GM, FE 50mm f/1.2 GM, FE 12-24mm f/2.8 GM, E 16-55mm f/2.8 G, E 70-350mm f/4.5-6.3 G OSS; Arca fit quick release plate feature is added to the bottom, more practical; 2. The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 150g; positioned by the switch and bayonet. Cannot be rotated.

Spherical levelling base gets a tripod or spotting scope dead level in seconds on sloping ground Grey butterfly screw unlocks for quick adjustment; three Allen screws lock the head firmly in place CNC-milled from black anodised aircraft aluminium — top and base plates each machined from a single piece Weighs just 234g yet handles up to 18kg, suiting heavy spotting scopes and gimbal heads Tilt range of -15° to +15° copes with most uneven hillside or hide setups

Compatibility: This lens collar tripod mount ring is specifically designed for Z 180‐600mm f/5.6‐6.3 VR Lens, providing stable support and balance.

Precise Fit and Compatibility: This tripod collar mount ring is designed to fit DG HSM Art 105mm F1.4 and DG DN OS 100–400mm F5–6.3 lenses. As a lens collar tripod mount ring, it prevents looseness and misalignment, ensuring stability for heavy camera lenses during photography.

LARUISEE

COMPATIBLE MODEL: Specifically designed for Samyang AF 35 to 150mm lens, it provides the necessary support for steady shots and improved photography results.

AS Standard Interface: This lens collar comes with a 3.1inch quick release plate that adopts AS standard. Compatible with tripod heads, panoramic heads, and Arca clamps.

【Flexible Angles & Improved Balance】 This NEEWER CA058 rotatable collar camera mount plate seamless quick horizontal to vertical shots without compromising stability, and enhances balance when using telephoto or other heavy lenses.

The LMR-Z186 Tripod Mount Ring from Haoge is designed for Nikon Nikkor Z 180-600mm f/5.6-6.3 VR Lens It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard.

1. The original structure and design of F (WIII) are adopted, and the function of quick release plate is added at the bottom; the inner wall of the tripod ring bracket is a concave-convex irregular structure, which is closely integrated with the lens; compatible with Canon RF 100-500mm f/4.5-7.1L IS USM Lens, can't be used for other lenses; 2. The contact surface is plastic composite film, will not wear lens surface when installed correctly; there should be no stickers on the lens surface installation position, if there is, remove it, otherwise it will affect the normal installation; after installation, it can be freely rotated like the original tripod ring; 3. The tripod collar bottom is added 60mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate; 4. The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly; 5. The lens collar IS-RF150 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for hydraulic heads with Manfrotto structure.