GTIWUNG 15Pcs Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board with Dual Protection Function +10Pcs 18650 Battery Holder Case with Lead Wire Bundle
Input Connector 15PCS Type C USB socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.
TP4056 5V 1A 18650 Lithium Battery Charger Module, Type-C USB, Dual Function (3)
Protection Circuitry Integrated chip safeguards against overcharging, overdischarging, overcurrent, and short-circuit conditions.
Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions 3PCS
Light state no load the light not bright, red light for recharging, is full of green light.
AOICRIE 10Pcs TP4056 Charging Module Battery Charging Board with Battery Protection 18650 BMS 5V Micro USB 1A 186 50 Charge Module (10pcs)
What you receive there are 10 pieces TP4056 charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace
APKLVSR 20PCS USB C 5V 1A Li-ion Lithium Battery Charger Module with Double Protection Functions
Input interface Type C USB. Input Voltage 5V; Battery Overcurrent protection current 3A; Charging cut-off voltage 4.2V 1%. Maximum charging current output 1000mA
10Pcs TP4056 Charging Module, Micro USB 1A Lithium Battery Charger Module, Lithium Battery 3.7v Charging Board for 3.6V, 3.7V and Lithium Polymer Battery
brand new and high quality.
10pcs 18650 Lithium Battery Charging Board Type C Charging Board 5V 1A with Protection Dual Functions TP4056 Lithium Battery Charge Module
18650 lithium battery charger board input voltage is 5V, battery over-discharge protection voltage is 2.5V, B + positive then the lithium battery, B- then negative lithium batteries.OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.
Teyleten Robot 18650 Lithium Li-ion 3.7V 4.2V Battery Charger Board DC-DC Step Up Boost Module TP4056 DIY Kit Parts Type-C 10pcs
Startable to limit inrush current, with battery reverse connection protection, low power standby, extend battery life
UMTMedia® 1 X Micro TP4056 5V USB Lithium Battery Board Charger Module For Arduino PI
Works with most lithium-ion batteries and popular platforms like Arduino and Raspberry Pi.
free shipping
DollaTek 18650-Board Dual USB 5V 2.4A Mobile Module 18650-Lithium Battery Charger-Board with Overcharge Overdischarge Short Circuit Protection DIY USB Board
Size 6.5 * 2.5 * 0.1cm; Dual output current 5V 2.4A; Input voltage B+ to B- 3.0 - 4.2V.
Li-ion Charging Module TP4056 + DW01, 1A Charging Current, MicroUSB for 3.7V LiIon Battery/LiPo Batteries/1-Cell Battery/Single Cell Battery(MicroUSB with DW01 protection IC)
INPUT VOLTAGE - the input voltage can be applied via the contact surfaces IN + and IN- or via the micro USB port.
Uadme Lithium Battery Charger Module - Li ion Battery Charging Board 2A 5V 4 in1 Charger Discharge Modules Charge Protection Boards for 3.7V 4.2V
Easy to Use The layout of the charger discharge module is reasonable, and the wiring is easy to use. Suitable for 3.7V or 4.2V lithium battery, with a discharge efficiency of up to 96%.
free shipping
