Tiles cutter table in comparison

High-Powered 500W Motor & 5400 RPM Speed Cut through tiles with ease, making it ideal for both precision and speed in professional or DIY applications.

Powerful 600W Motor With a robust 600W motor operating at 2950 RPM, this cutter effortlessly handles various tile materials, ensuring consistently clean and precise cuts every time.

Cutting capacity up to 15mm

Tile cutter is ideal for cutting bathroom and kitchen tiles

Enclosed water reservoir minimises dust levels & lubricates the blade

Cut Multiple Flooring Materials with Ease This 13" vinyl floor cutter is perfect for cutting a wide range of materials including Vinyl Plank, LVT, LVP, SPC, PVC, WPC, and VCT. It can cut flooring up to 13" wide and 10mm thick. Important Do not use on Laminate Flooring or Hardwood Floors. Please confirm the material type before purchasing. Cutting any unapproved materials will void the warranty.

Strong & Durable Cutting Wheel The high-quality tungsten carbide cutting wheel offers extreme strength, precision and longevity. The push cut and snap action is easy to use ensuring optimal performance, on a variety of tiles from ceramic to porcelain, up to 300mm square and 10mm thick and will also allow for diagonal cuts of up to 210mm.

Safe use Safety during use is ensured by the emergency stop switch and the cutting disc guard, which prevents injuries and protects against splashing water.

TUNGSTEN CARBIDE WHEEL Suitable for straight and diagonal cuts, this is the perfect tile saw for ceramic tiles, glazed tiles, and porcelain tiles. However, it is not suitable for cutting granite or marble

AUTION When installing, pay attention to the direction of the rod! When scratching, use full force and evenly, the cracks must be deep! Do not stick the tiles too far into the pliers! Do not exceed thickness requirements! For large tiles please cut both ends of scoring line! We strongly recommend testing and practicing with a few scrap tiles before using this cutter, because some skills are required. Read all the notes below this page! You must take out a few waste tiles for testing, because it has certain requirements on strength and operation methods, please operate on the waste tiles before using them normally.

Easy To Use & Only 4 Steps Required! Step 1 Clean the surface and mark the drilling position. Step 2 Place the hole saw into the positioner and adjust the location of the hole. Step 3 Press the double suction cups positioning system of the positioner and fix the hole saw by adjusting the positioning shaft wheel. Step 4 Complete the drilling work under the lubrication of water. Please refer to the attached instructions for details

Non-Skid Safety Design This tile chamfering machine has a non-slip safety design on the bottom, which ensures stability and safety during use, and won't damage the tiles and tabletop. It can be used for cutting ceramic products, tile walls and so on.