Spirit levelss 6ft in comparison

Double milled base with V groove

Lightweight aluminium.

Wall Thickness 1.3mm

CROSS LINE MODE Laser wavelength 635nm, power

High Visibility The green laser level line is 4x brightness than the red beam, which can provide a working distance of up to 100ft, available outdoors. Safety level-Class II,

EXTRUDED 0.9MM BOX SECTION - Sturdy box section for robustness.

The three large easy view vials are accurate to 0.5mm m

Multifunctional 3D laser The laser level goes into automatic mode after switching on and automatically levels itself within 3 , beyond which it flashes quickly to indicate an error. When switched off, press and hold the control button for 3 seconds to enter manual mode, where you can select any angle for the laser line projection. The laser line is switched using the H and V buttons.

Self-Leveling and Manual Mode Green laser level in self-leveling mode, the self-leveling laser can automatically level within 6 s when the tilt angle 4 . Press and hold the top button for 2 s to start manual mode, which locks the laser line and can be used at any angle

Dependably Durable Built-in slip-free stoppers for secure placement when making marks; soft shock-resistant TPR rubber end caps and powder-coated yellow-and-black exterior for enhanced visibility on job sites

ANGLE MEASUREMENT Placed on a surface such as a saw table, it can be zeroed and repositioned on the blade using the magnetic base to secure it, ideal for checking and altering to a specific angle for bevel cuts from a table surface

ULTRA-DURABLE MATERIAL This magnetic spirit level has extruded aluminium construction (1.4 mm thick) and a powder-coated finish for corrosion-resistance. This lightweight spirit level is easy to carry and use for long periods while also being robust and sturdy for tougher environments