Pond pumps 7000 in comparison

750W HIGH-EFFICIENCY POWER Portable and energy-saving with a maximum water transfer capacity of up to 13,000 L H and a maximum delivery height of 8 m. Achieves 8,000 L H at a 3 m discharge lift

The Max. Output is 5000 L H with a power consumption of only 26 W.

Ideal for running filters or watercourses

Perfect for Watercourses or Filtration Systems

Brass bleed screw

All pumps in the Aquaforce pallet are equipped with a protective mechanism that allows the user to reduce the inlet diameter for solids from 6mm 10mm (depending on model) to 2mm

Dry Burn Protection&Don't Worry About Water Burning Out When the water level is not enough, the internal motor of the water pump runs to 85 , and the pond pump will automatically cut off the power supply. When the motor temperature drops to about 23 , it will automatically start working. IPX8 insulation material and temperature control protection switch design, there is no need to worry about burning out when the submersible pump, is running without water.

24 7 operation small pond pumps

Efficient 400 W with a maximum drainage flow of 10000 L h to easily empty water from ponds, pools, hot tubs, and other bodies of water up to 7 m deep. Also, with an option of replacing the base filter, it can suck water till the last 2 mm on flat surfaces

80W Superior Performance The pond water pump boasts an 80W 100% pure copper motor and high-quality rotor for exceptional performance and energy efficiency, delivering a maximum lift height of 3.5 meters. Experience a quiet operation with a noise level as low as 28dB, ensuring a peaceful environment without any noise disturbances.

Max Flow Rate 4,000 Lph