WhichOne › electronics › photography › tripod › magic arm

The best magic arms in comparison

Guaranteed independent and reliable
Millions of satisfied users every year
Last updated on 17.05.2025

Filter

Sort

Brand:Reduced items only:

Best choice

Manfrotto 143N Magic Arm, Black, 13.2 x 5.9 x 1.8 inches

Manfrotto

18% off

free shipping

show more show less

9,9

Check price

Show on Amazon

Features

Take a trip to tinsel town with pure essential oils and natural butters
Ready to gift - wrapped in hand-designed paper and tied with a bow
Features industry-standard size attachments
Reaches up to 53 cm for practicality
Incredibly robust aluminium supports up to 3 kg

£ 112.00

£ 81.00

£ 132.00

SMALLRIG 22" Magic Arm w Clamp, Flexible Desk Camera Mount & Clamp, Articulating Friction Boom Arm w Thread Adapter, for Light, Webcam, Mic, Action Camera - 4766

SMALLRIG

15% off

free shipping

show more show less

9,8

Offer ends in:

01Day

21hours

47minutes

37seconds

Check price

Show on Amazon

Features

Note The entire kit is made of aluminum alloy, recommended load capacity 0.25kg 8.8oz. Any inquiries will be responded to within 24 hours, and we offer a two-year after-sales service.
Anti-Deflection Design for Enhanced Stability The magic arm securely connects to the super clamp via an anti-deflection 1 4 -20 interface, enhancing stability and security. It stays secure even if accidentally bumped.
12 Anti-slip and Anti-scratch Designs Silicone pads and rubber rings inside the clamp, on six balls, and at both ends of the magic arm. These enhancements increase friction for a tighter grip on equipment while protecting it from scratches.
Versatile Clamp The crab clamp can open up to 63.5mm and features rotatable friction pads, opening 50 mm, suitable for clamping onto regular desktops as well as round tubes like tripods, stabilizer handles, and more.

IFOOTAGE 11" Camera Magic Arm,Articulating Magic Arm with 1/4" and 3/8" Thread Screw for DSLR Camera Rig/LCD Monitor/LED Lights, Ball Head,Large Wing Nut,Payload up to 6KG,Spider Crab MA5-6,11inch

iFootage

free shipping

show more show less

9,5

Check price

Show on Amazon

Features

IFOOTAGE Spider Crab MA5-6 Magic Arm This magic arm has other specifications, 7inch magic arm model MA3-4(B09D356RBR). Standard model with 1 4" screw ball head and cold shoe head.5.5inch model LT2-5.5(B09D3896YP),9.5inch long magic arm model LT4-5.5(B09PZY15V9).
Magic Arm with Dual Ball Heads Flexible mini ballhead with 1 4 &3 8" Screw.With double safety protection design, the ball head is detachable, easy to install on the equipment.It an fix angle through big wing nut. Cold shoe head with thread, metal material, anti-rust, strong
Max. Payload The horizontal load-bearing capacity is 2KG 4.4lb (when the magic arm is unfolded), and the vertical load-bearing capacity is 6kg 13.23lb (when the magic arm is folded or at 90 ).
MMINI Magic Arm but Powerful It can be securely mounted on cameras, tripods, monopods, and at the same time,as a camera clamp mount arm, link with other photography accessories,LED flashes, microphones, monitors, etc.
Articulating Magic Arm high-quality aluminum alloy material, the structure of the magic arm and the angle of the ball head are stabilized by the Large wing nut.

JEBUTU 22" Magic Arm with Clamp, 360° Flexible Camera Desk Mount & Clamp, Overhead Desk Mount, Articulating Friction Boom Arm with 1/4" Thread for Webcam, Microphone, Action Camera, Smartphones

JEBUTU

17% off

free shipping

show more show less

9,5

Check price

Show on Amazon

Features

Longer, More Flexible Magic Arm This 57cm 22" magic arm is much longer than general gear magic arm. Different from only one joint design in the market, our magic arm features three joint. Each joint features double-ball and T-type knob for independent shooting angles adjustment, making it an ideal accessory for overhead shooting, live streaming, stop-motion video, vlog and videoconferencing
Anti-Deflection Design for Greater Stability Designed with anti-deflection deadbolt lock structure at the ends of the arms, the clamp and magic arm can be securely connected by 1 4" thread, enhancing stability and security. Don't need to worry about loosening caused by reverse deflection during use
14 Anti-slip and Anti-scratch design 2 silicone pads inside the clamp, rubber rings on six ball heads and silicone pads at both ends of the magic arm, these enhancements increase friction, firmly secure the device while protecting the device from scratches
Multi-Function Super Clamp 1, Features two rotatable friction pads on super clamp, greatly enhanced stability, suitable for clamping on pole, tabletop and tripod. 2, The opening width of crab clamp is 20mm 0.78" to 50mm 1.96" by adjusting the T-Shape Knob. 3, There're 3 8" and 1 4" threaded holes on super clamp, can be used to attach additional photographic accessories
Package includes 57cm 22" articulating arm x1, super clamp x1, phone clamp x1, 1 4 to 3 8 threaded adapter x1, 1 4 to 5 8 threaded adapter x1. The recommended load capacity 0.25kg. Easy to setup and carry

Recommendation

Neewer 88"/224cm Light Stand Stainless Steel Heavy Duty with Pistol Grip, Sliding Arm, Detachable Caster, Folding Leg, 1/4" 5/8" Spigot, Photography Flash/Ring Light Stand, Max Load 22lb/10kg, ST003

NEEWER

25% off

free shipping

show more show less

9,5

Offer ends in:

06hours

52minutes

37seconds

Check price

Show on Amazon

Features

Heavy Duty Light Stand Crafted from stainless steel with chrome plating, this stand is exceptionally sturdy and can handle devices weighing up to 22lb (10kg). The base and extension center column connect through a connector, allowing for a maximum height of 88" (224cm)
1 4"-5 8" Reversible Spigot The reversible spigot can insert into the sliding arm and get secured by the screw knob. It has a 1 4" screw for super clamps, magic arms, and phone mounts and a 5 8" stud for monolights, ring lights, LED video lights, reflectors, and other light modifiers
360 Casters with Brakes Three casters can attach to the base and let you effortlessly roll the stand and equipment on the floor. They can travel in 360 directions and feature brakes that keep the light stand stationary
Foldable Base for Storage Lift the folding legs and pull out the latches to collapse the base into a compact size for ease of storage and transportation

K&F Concept 11" Magic Arm with Super Clamp, Camera Clamp with 1/4" 3/8" Thread Screw, Articulating Friction Arm with Cold Shoe Mount for Monitor LED Light Action Camera Tripod Osmo Pocket 3

K&F Concept

free shipping

show more show less

9,5

Check price

Show on Amazon

Features

Anti-scratch Design There are 2 cushions on the crab clamp and 1 circular rubber pad at the top of magic arm. These cushions not only increase friction but also protect the equipment and the clamping area from wear. NOTE The maximum load is 2kg.
Easy to Adjustable All joints of the magic arm can be loosened or tightened at the same time with the thumbscrews. When the thumbscrews are loosened, the ball head is free to rotate 360 and arm can be positioned at various angles. Tightening the thumbscrew locks the ball joint and articulating arm in place.

ULANZI SC-02 4.5" Camera Car Suction Cup Mount for GoPro, Vacuum Suction Cup Holder with Pump and Quick Release NOTA Magic Arm, Camera Car Mount for DJI OSMO, GoPro Hero, Nikon, Sony, DSLR

ULANZI

15% off

free shipping

show more show less

9,4

Offer ends in:

01Day

21hours

47minutes

37seconds

Check price

Show on Amazon

Features

Super Strong Load Capacity SC-02 camera car suction cup mount is made of high quality aluminum alloy and high quality rubber, it adopts industrial grade air pumps and vacuum suction cups for greater suction power, load capacity up to 3kg, vertical suction up to 40kg and horizontal suction up to to 60 kg. It are compatible with various action cameras, such as GoPro Hero 10 9 8 MAX 7 6 5 Session, DJI Osmo Action Sony.
Flexible Angle Adjustment The dual 360 ball head allows you to adjust the angle of your camera to your liking, so you can get the perfect shot every time. You can also work with GoPro and DJI action cameras with the included action cam adapter.
Versatile Mounting Options NATO Rail Magic Arm is equipped with multiple 1 4" and 3 8" threads and adapters that can be easily extended and attached to ball heads and other accessories.
Wide Application Firmly attached to any smooth surface with super suction, such as boat, metal ceramic surface, windshield windshield, glass door, car door, hood, car roof, truck lid, car window, etc.
Packing List 4.5" Suction Mount*1; Ball Head Magic Arm*1; NATO Rail*1; Go Pro Adapter*1; 1 4" Screw*2; Allen key*1; Storage bag*1. Please note that the action camera adapter is packaged separately, so you should check the package carefully. If the GoPro adapter is missing, please contact us and we will send you another one.

DFCINE Magic Arm Camera Mount - Stainless Steel Articulating Arm with Quick Release, Anti-Twist Pins, and Rosette Gear for Camera/Monitor/LED etc,1/4''&3/8'' Screw-Payload 11lbs/5kg (11inch)

DFCINE

free shipping

show more show less

9,4

Check price

Show on Amazon

Features

Gear Anti-slip Design The center knob adopts a reverse gear design, which greatly increases the friction resistance of the robot arm and can withstand a maximum load of 13lbs 6kg. The quick-release head connection also adopts a gear design, and a concave buckle is added in the center. The precise anti-slip design allows you to no longer worry about damaging the device during use.
Quick-release Magic Arm The Magic Arm has a convenient quick-release design, with quick-release interfaces on both ends. The quick-release head has 1 4-inch and 3 8-inch elastic threaded ports, which increases the diversity of adaptation.
Locating pins & anti-slip pads The quick-release heads on both sides of the magic arm are equipped with ARRI positioning pins, as well as rubber anti-slip pads on the bottom, which further increase the stability of the robotic arm, allowing you to shoot with more confidence.
360 Degree Rotation Magic Arm's dual 360 ball head design allows you to adjust it to any angle as needed. One knob loosens all joints so that you can put it where you want, and the same knob locks everything in place.

TILTA Magic Arm with 1/4"-20 Mounting Points, Universal Magic Articulating Arm for Monitor Electronic Viewfinder Camera Light Microphones TA-MAA

TILTAING

free shipping

show more show less

9,4

Check price

Show on Amazon

Features

LIGHTWEIGHT & DURABLE Made of aluminum alloy and stainless steel, sturdy and durable.
LOCATING PINS This adjustable arm features -20 mounting points with locating pins on both ends.
ADJUSTABLE All joints can be loosened at the same time and allows users to secure accessories in the perfect position. When you loosen , the ball joints move around freely. Locks the ball joints tight in place. 360 dual ball head design allows you to adjust angles freely.

11 Inch Adjustable Magic Arm and Super Clamp with 1/4" and 3/8" Screw Holes for Camera Rig, Monitor, Flash Light, Sports Camera Rig

ztowoto

show more show less

9,3

Check price

Show on Amazon

Features

This is a very practical 11-inch camera magic arm, which can be adjusted according to needs. It is suitable for LED lights, monitors, etc.
Made of high-strength aluminum alloy material, with a stable lock control knob to ensure the safety and stable shooting of your equipment, which can be quickly locked and released for easy adjustment during shooting.
The super clamp can be adjusted in multiple size ranges, is easy to install, and is suitable for fixing on brackets or other products, especially on bicycles or motorcycles. It is very convenient to use.
The super clamp is used with the magic arm to give you more scene shooting experience, and it is your right-hand assistant for creating videos and shooting.
We provide a 365-day quality after-sales guarantee. If you have any questions, you can contact our customer service staff at any time. We will provide you with new products or refunds. Thank you and wish you a happy life.

This ranking is created through algorithmic analysis of millions of products tailored specifically to your search. We aim to find the most suitable product for you based on manufacturer information and price. The ranking reflects our opinion and should serve as a good starting point for your purchase. We would like to point out that we have not tested the products ourselves and link to selected online shops and partners from which we may receive compensation.

You might also be interested in these magic arms.

REFLEX CAMERA Metal Articulating 32" Magic Arm with Super Clamp Overhead Camera Mount, 1kg Load Capacity, Boom Arm with 1/4", 3/8" Screws Mounts - Photography, Videography & Streaming - Adjustable

Flexible & Stable Positioning The cantilever design of this boom arm and articulating camera mount allows for maximum flexibility and reach, making it easy to adjust cameras or lights overhead or at various angles for optimal framing and lighting setups

free shipping

Check price

FALCAM F22 Dual Head Quick Release Articulating Magic Arm Kit Camera Mounting Adapter for Camera Cage Filmmaker Photographer

Smaller and lighter, speed it up Not only follows the design of mortise and tenon structure which leads to "a push to install, a press to remove", the F22 series also includes a complete set of quick release system for common equipment accessories

free shipping

Check price

TARION Magic Arm with Super Clamp - Upgraded 11inch/28cm Flexible Camera Articulating Friction Arm Mount & Adjustable Crab Clamp with 1/4" 3/8" Thread Screw for LCD Monitor LED Lights Action Camera

Advanced Version of Magic Arm Camera Clamp Don t worry about any break or unpleasant use experience, we ve upgraded the screw and tightening konb of the magic arm. Made of high quality aluminum alloy material, it is durable and reusable for your need.

Check price

UTEBIT Magic Arm, Articulating Friction Arm with Super Crab Clamp and 1/4" Cold Shoe Mount, Magic DSLR Tripod Arms Kit for Photography, Video, Camera Rig, LED Light, LCD Monitor (22in)

Multi-Functional Camera Clamp Mount This super clamp camera mount has a 22 inch long articulating arm, super clamp with 1 4" and 3 8" threaded holes, and a 1 4" hot shoe mount, allowing you to mount DSLR camera, flashlight, LED light, microphone, monitor, etc., the perfect companion for photo enthusiasts and professionals to take photos and make videos

Check price

11 Inch Adjustable Articulating Magic Arm, Super Clamp with 1/4"and 3/8" Screw Holes and Dual-hole Holder for Photography, Video, Camera

Super Clamp Super clamp has 1 4" and 3 8" threads. The maximum opening is 5.5cm, and the minimum is 15mm. Can be mounted on tables, light stands, stands, tubes, bicycles, motorcycles, etc.

Check price

SMALLRIG 11'' Magic Arm with Super Clamp, 1/4''-20 Threaded Articulating Arm with Cold Shoe Mount for Monitor, LED Light, Microphone - 3726

Convenient Combination SMALLRIG Super Clamp & Magic Arm (11'') with Cold Shoe 3726 consists of crab-shaped clamp and magic arm (11"). Maximum minimum open width is 54mm 15 mm and Maximum load is 1.5 kg. The double ball heads are 360 degrees adjustable.

~~£ 22.90~~

Only:

45hrs

47min

37sec

Check price

Manfrotto 244 Variable Friction Arm with Bracket (Black) for Photographers and Videographers

Clever, ergonomic and secure locking function

~~£ 170.71~~ free shipping

Check price

ChromLives 7" Magic Arm Articulating Magic Friction Arm Adjustable w/Hot Shoe Mount 1/4" Tripod Screw for DSLR Camera Rig/LCD Monitor/DV Monitor/LED Lights/Flash Light/Microphone

MAGIC ARM- This is a 7" precise and durable designed Articulating Magic Friction Arm which provides great versatility for the positioning of access. 7" magic arm is more stable and easy adjustment.

Check price

Nitze Camera Magic Arm with Double Ballheads (1/4" to 1/4" Screw with Retractable Locating Pins), Articulating Magic Arm Camera Mount Aluminum Alloy - N50-G1

Double Ballheads Nitze N50-G1 articulating magic arm provides two ballheads (1 4" screws with retractable locating pins) on both ends, which allows users to easily mount cameras, monitors, lights, microphones, super clamps or suction cups

free shipping

Check price

DF DIGITALFOTO 11” Camera Magic Arm with Quick Release, Heavy Duty Magic Arm with Dual Ball Heads, 1/4 and 3/8 Screw, Retractable Anti-twist Pin, Stainless Steel Ball Heads and Rosette, Max. Load 6kg

Safety and Reliable This Rosette magic arm boasts anti-twist pins and silicone mats on both ends to securely hold equipment with female pin ports in place. This design keeps your gear from rotating around and getting loose, allows you to create worry-free and unleash your creativity to the fullest.

free shipping

Check price

TECDW 11 Inch Adjustable Magic Arm with Super Clamp, 360° Ball Heads, Articulating Magic Arm with 1/4" and 3/8" Threaded Holes, Magic Arm Clamp for Tripod, LED Light, Monitor, Flash Light, Camera

High-Quality Material Our adjustable magic arm are made of high-quality aluminum alloy, which is strong, durable, not easy to corrode, and built to last. It locks accessories tightly no matter how demanding your shooting environment is. (NOTE The maximum weight capacity is about 2kg.)

Check price

YALLSAME Double Super Clamp Camera Mount with Magic Arm & 360° Rotation Double Ball Head Adapter for Camera Desk Studio Photography Reflector Light Pole Stick Branch Motorcycle Umbrella

Compatibility The super camera clamp mount is compatible with GoPro AKASO DJI OSMO Insta360, Canon Nikon Sony DSLR Cameras, iPhone.

free shipping

Check price

The best magic arms in comparison

Guaranteed independent and reliable

Features

Features

Features

Features

Features

Features

Features

Features

Features

Features

You might also be interested in these magic arms.

Our offer