Laser levels for outdoor use in comparison

+ - 6mm @ 30m (H) + - 9mm @ 30m (V)

PULSE MODE With Pulse mode, The laser receiver could receive the signal from laser level. That s to say, you could still see the signal from laser level and work freely even with strong outdoor light at distance of 20 30 meters. Works with detectors to extend longer distance range

Highly Accuracy The accuracy of the professional 3D laser level is 2mm at 10 metres. It is 12-line green laser level with one 360 top horizontal laser plane and two 360 vertical laser planes that can be projected onto ceilings, walls, and floors throughout the room.

Laser Level Tilting to 3 Precise measurement with a levelling accuracy of + - 1mm at 7m 1 25'' for laser lines. The laser line flickers to prove that the machine is not in the safe and level range. Please adjust the level

Stepless dimming Long press "H" "V" of the nivel laser level to gradually increase decrease the brightness. Green laser level running time 6-37 hours (depending on brightness)

Self-Leveling Mode, Manual Mode & Pulse Modes This Red laser level has a slide switch that allows you to switch between vertical and horizontal lines, or open simultaneously. When operating in self-leveling mode, 3 1 leveling and compensation interval, the leveling and compensation time is less than 3 seconds. In manual mode, the self-leveling function is disabled and the cross is locked. You can use the laser detector to extend the laser range to 164ft 50M in pulsed mode.

Accuracy + - 3mm 10m. Self-levelling cross line laser is accurate to 0.3 mm m in levelling applications

4 x 360 full layout this cross line laser has two horizontal 360 levels and two vertical 360 levels. It covers the entire room and visualizes the square floor plan. The four 360 laser levels can be selected individually via the separate H and V keys on the keyboard. You can easily turn any laser line on and off.

Precise Results For highly accurate measuring, the line level delivers precise results within 0.4 mm m (lines) and + - 1.0 mm m (plumb point); the laser level can self-level up to 4 or be put into slope mode to create diagonal lines

Brightness Adjustment The brightness of the laser level can be adjusted via "V" and "H". Press and hold the V button to decrease the brightness, and press and hold the H button to increase the brightness. The laser level can be used in different indoor environments. You can also adjust the laser brightness according to the usage environment.

3x360 Degree The LG-3Dx laser level is a 3x360 degree full layout design. Includes 1 horizontal laser line and 2 vertical laser lines, covering every corner of the room easily. Users can switch the combination of irradiation laser lines according to their needs

Professional Pulse Mode The laser level rechargeable support pulse mode, works with a 10 kHz receiver (receiver is not included). The scope of work can be extended to 197ft 60m under pulse mode with a laser receiver.