Gas detectors caravan in comparison

The RF10-PRO HiSPEC alarms and detectors all fully comply with the new 2022 Scottish Legislation

Alarm waiting time The waiting time for the co alarm to sound depends on how quickly the carbon monoxide level rises. Normally, it takes between 60 and 90 minutes for the co detectors to sound at 50ppm, between 10 and 40 minutes at 100ppm and immediately at 300ppm. If a large change in carbon monoxide concentration is detected over a short period of time, the co alarms may sound for a short period of time.

Prevent Carbon Monoxide Poisoning -- Our CO detector can real time monitor the CO concentration in air. When the CO concentration exceeds the standard, the detector gives out "di, di, d....." alarm and red light flashes until the ambient gas volume falls below alarm set point.

Directional tube for hard-to-reach places.

Remind for Installation -- Do not install the gas alarm in a place with a lot of dust, oil smoke and water vapor, which will affect the internal sensor of the alarm and cause false alarms. Please choose a suitable location to install the alarm according to the actual situation

Quick and Accurate Gas Leak Detector The natural gas detector is widely suitable for LPG, methane, ethane, propane, butane, natural gas, coal gas, gas fuel, liquefied natural gas, etc., and it will exactly pinpoint a leak, reducing the risk of gas explosion and keeping your family and property safe. It potentially reduce energy bills

MULTIPLE DETECTABLE GASES Locates combustible & explosive gas leaks from methane natural gas, propane, fuel, ethane, butane, alcohol, coal gas, gasoline, toluene, kerosene, sewer gas, and other flammable gases.

Multiple Detectable Gases This combustible gas detector possess good sensitivity, and long service life, it can detect methane natural gas,propane,ethane,butane,ethylene,propylene,butene,acetylene, butyne,phoshiphine,gasoline, sewer gas, and other flammable gases.

EASY TO USE Switch on the gas detector in a clean air environment and wait for the beep signalling the detector is ready to use. Take the detector to the area where you want to check for gas leaks. If as soon as the internal sensor detects gas concentrations over 50ppm, the unit will indicate by illuminating the LEDs on the front of the detector and raise an audible alarm. The greater the presence of gas, the more LEDs will illuminate, and the alarm will sound more frequently.

MULTIPLE PURPOSES The portable gas sniffer is suitable for gas pipeline leak detection, household gas prevention, oil and gas exploitation, tunnel mining operations, chemical industry, metallurgy, oil refining, biochemical medicine and other industries. This gas leak detector can measure flammable and explosive gas leaks such as methane, ethane, propane, butane, CO, ethanol, acetaldehyde, gasoline, LPG, gas, ethylene fuel, etc.

Sealed Battery-Power for Convenience The Honeywell R200C-1 carbon monoxide detector is battery-operated, allowing for flexible installation anywhere in your home without the need for wiring, and ensuring continuous 10 year protection

Quick Response Time --- With a Response Time of 500PPM (Approximately 5 Seconds) for Lower Concentrations And 500PPM (Approximately 2 Seconds) for Higher Concentrations, the Device Ensures Swift Detection and Timely Alerting