Fuels injector tester in comparison

6 Nozzles Adapters & 8 Pulse Modes The 5V 12V auto fuel injector pressure tester can be used with any fuel pressure tester to easily clean and test most fuel car and motorcycle injectors. 8 kinds of pulse modes, in the continuous working of mode four, it can help determine whether the injector is good when the engine is turned off. 6 nozzles makes it fit majority of car and motorcycle injectors. * Support to clean and test the petrol injector.

Safe and Reliable Our injector tester kit is designed with input power reverse polarity protection and output short circuit protection. If injector damage or output pulse short circuit occurs, the LED indicator will sound an alarm. This ensures the safety and reliability of the tool and gives you peace of mind when using it.

Upgraded Ideal Tools The fuel injector tester is designed with 8 pulse modes and LED display indicator lights. It features advanced cleaning and diagnostic capabilities, allowing you to easily diagnose and fix injector issues such as blockage, leakage, damage, and burnout. It is consisting of 4 pulse signal output modes(short medium long continuous pulse) with 2 output Power(12V 5V) to check conditions of the injectors.

Test for 2 Injectors Simultaneously & Ultra-long Power Cord Come with two pairs of output terminals, allowing you to test for two injectors or for one injector at once. The tester power cord is up to 40inch and the test lead is up to 20 inches for convenient testing. The wires are made of superior silica gel, allowing the tester to work at high and low temperatures. To make it perform better, it is recommended to work at normal temperatures.

COMPONENT ACTIVATION & SENSOR SIGNAL CIRCUIT TEST VDIAGTOOL V200 Pro power circuit probe kit can generate activation signals to electrical components like car lights, motors, windshield wipers, radiator fans, relay, fuel injector and etc to troubleshoot electrical problems; locate auto short circuits if you keep getting blown fuses and also test various sensors, signal circuits to pinpoint the root cause to electrical issues when you have extracted DTCs from vehicle ECUs.

The gauge comes with a pressure release valve on the side of the gauge, also a drain hose for safe fuel recovery

Easy To Use Disconnect the fuel injectors and insert a small light. If light is flashing,this indicates electrical system is working properly. If light is steady or off, this indicates electrical system malfunction. If problem persists,check fuel system

Works with engine off and pulse timer may be used with fuel pressure gauge.

8 Pulse Modes LED Display The fuel injector tester features 8 versatile pulse modes, combining 4 distinct pulse signal outputs (single, short, long, and continuous) with 2 voltage levels (high low 12V or 5V). This flexibility allows for precise and efficient diagnosis of petrol vehicle injector issues. The LED screen clearly indicates the active mode for easy operation.

IAC Light Compatibility 700 TBI FPI With Flat Or Square 4-pin Connectors

HIGH POWER AND LOW POWER 2 MODES The vehicle injection pump injector cleaner tester set has high power and low power 2 kinds of drive mode. Specially designed to test and activate the fuel injector, this allows the unit to be used on standard EFI injectors as well as GDI injectors (5V, 12V). The 2 power levels allow you to test the injection of fuel at different speed conditions. You can adjust it according to your needs. * Turn off the engine before use.

MAKE AUTO REPAIR EASIER - 12V Automotive Fuel Injector Tester performs complete self-maintenance on your car's fuel injectors without the need to travel to an expensive repair shop, helping you save on maintenance costs and maintenance time. By maintaining your fuel injectors on a regular basis, you can extend the life of your engine and prevent more expensive repairs in the future.