Ev ultra ev charger cables 3 core 6mm swa power data in comparison

Fast Charging This Type 2 to Type 2, 32A single phase ev charging cable allows up to 7.2kw charging power. The 10m long ev cable is made of high-quality copper and provides good conductivity for faster charging. You can use it on any Type 2 (IEC 62196-2) socketed public or home charging point to charge your electric vehicle & plug-in hybrid vehicle.

SMART AMP SETTINGS - Our Type 2 EV charger has a smart current memory function ideal for plug sockets on a timer which ensures your car will always charge at the current setting you select.

Note for 32A 22KW please remember that your power supply port and car power supply port meets the 16A 11KW 3 phases, if either of these two limits is 16A and 3.6KW, run with the maximum current you have.you need a system with adequate cable cross-section and a more than perfect grounding.

Wide Compatibility Alxum Portable Type 2 EV charger is compatible with all type 2 IEC 62196-2 standard EVs. Including Model 3 S X Y, i3, i4, i8, iX, ID.3, ID.4, ID.5, e- up!, I-Pace, Leaf, E-Tron, EV6, IONIQ 5, Mach-E, EQC, 500e, Kona, e-208 and Zoe.

LED DIGITAL SCREEN The large screen allows you to clearly monitor the charger's charging status, temperature, time setting, current setting and error reports, with all data at a glance 'eye.

High-Speed EV Charging - This Type 2 charging cable supports a Max output of 11kW 16A (also supports 3.6kW 16A ). Compatible with both 16A and 32A charge points at home or public stations, it allows you to charge your EVs quickly and efficiently, provides a rapid charge by AC EV Charger whether you at home or on the go.

Wide compatibility EV charger cable type 2 to 3 pin plug can charge your electric vehicle anywhere with a compatible 3 pin socket. The Electric Vehicle Charging Stations is suitable for most European and UK EVs and PHEVs that comply with IEC 62196-2. However, we recommend that you check the specifications of your vehicle or contact our customer service to ensure compatibility, especially for specific models and maximum charging currents.

Maximum safety The EV charger is made of high-strength ABS material for better quality and longer service life. The EV charger cable is equipped with overcurrent, overvoltage, undervoltage, leakage and overheating protection. This electric car charger complies with CE, TUV and EMC safety certifications and ensures reliable and safe charging for your vehicle. For specific models, please refer to the vehicle page on the detail page or contact customer service.

Adjustable 3 Pin EV Charger The EV charger cable type 2 to 3 pin plug with current adjustable between 6 8 10 13A, 6A and 8A are suitable for long-term charging, while 13A is suitable for emergency charging. Its delayed charging function (0-12 hours) allows charging to begin during off-peak electricity hours, helping you save money

13A EV Charger The fixed 13A EV charger with max power of 3.3kW. When the car is fully charged, it can stop charging automatically to prevent overcharging.(To avoid overheating, please must use a new single socket 13A on the ring mains.)

Fast Charging Mode The adjustable current of our EV charger is 6A 8A 10A 13A, and the output power is 3kW, which faster than traditional chargers. You can choose the current according to the battery and vehicle status. Note The current cannot be switched during charging.

HIGH COMPATIBILITY This type 2 electric car charger is equipped with a UK 3-pin plug, suitable for all European electric vehicles and plug-in hybrid vehicles that comply with the IEC 62196-2 standard. Compatible with Mercedes, Renault, Tesla, Nissan Leaf, Evoque P300e Hybrid, Peugeot Ion, Peugeot e208, Mini, Volvo, Hyundai, Kia, Jaguar and more.