1pcs Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board Module,4S 40A Enhanced
Note When soldering the battery for the first time or when charging is in progress, as long as the single battery exceeds 4.2V, the "430" resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the "430" resistor is severely hot, check if the wrong line is connected.
free shipping
RoyPow LiFePO4 Battery Charger 14.4V 3A Automatic Trickle Battery Charger Maintainer for 12V LiFePO4 Lithium Battery with Alligator Clamp and Ring Terminal
Charge Dead Battery even though the battery is over-discharging and drops down to 1 volt, this trickle charger can wake up the sleep battery, bringing it back to life.
£ 30.99
free shipping
2pcs 10S 40A Li-ion Lithium Battery PCB BMS 18650 Charger Protection Board
free shipping
QCCAN 3S 40A 12.6V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit for Drill Motor (3S 40A)…
Applications applicable to the nominal voltage of 3.7V, fully charged 4.2V lithium battery (including for 18650, for 26650, polymer lithium battery), can be drilled below 170W Operation notes on the details page .
HTRC 3A Car Battery Charger, 6V/12V LiFePO4 Battery Charger, Battery Maintainer Trickle Charger for Boat, Motorcycle, Lithium, LiFePO4 and Lead-Acid(AGM, GEL, MF, EFB, SLA, WET)
One Click Switch 6V 12V battery charger switch 3 modes with one button. For normal charging, please short press the button to select the charging mode, the charger will automatically enter the working state, no need to long press the button!
free shipping
PCB Board, 3s 12v 40a Lithium Battery Board with Balance Charging for Electric Vehicles Electric Power Mopeds Scooters
Quick Heat Dissipation The aluminum sheet of this 12v charging board lithium adopts a thicker design, which can effectively realize the function of fast heat dissipation
Be In Your Mind 2Pcs 4S 40A Li-ion Cell Protections Board Li-Ion Lithium Battery 18650 Charger PCB BMS Protective Board with Balance for Drill Motor
Wide Compatibility Suitable for lithium-ion batteries with a nominal voltage of 3.6V or 3.7V, covering various popular battery types like 18650, 26650, and polymer lithium-ion batteries.
BigKing Lithium Battery Protection Board, Multi-Protection, BMS PCB with Balance Charging, Thick Aluminum Fins, 3S 12V 40A
We not just sell them, we also provide professional after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can.
free shipping
Yunseity 14S 48V 40A Li-ion Battery Protection Board, Li Battery Cell BMS PCB Protection Board Module with Balance, for Lithium Ion, Lithium Polymer Battery
The difference between the split port and the same port the split port when charging and discharging, the positive and negative poles are separated; the same port charging current is the same as the discharge current, and charging and discharging are in the same place.
1pcs Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board Module,4S 40A Balanced
Note When soldering the battery for the first time or when charging is in progress, as long as the single battery exceeds 4.2V, the "430" resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the "430" resistor is severely hot, check if the wrong line is connected.
10S 40A Li-ion Lithium Battery PCB BMS 18650 Charger Protection Board
free shipping
BMS Charger Protection Board, 7S 40A 24V with Balanced Protection Charger Protection Module for NCM/NCA Lithium Battery Pack
Comprehensive Protection The BMS features a variety of basic protection functions, including over-charging over-discharging over-current short-circuit temperature protection, voltage balance, etc.
free shipping
