16 line laser levels in comparison

4x360 Full Layout LasGoo LG-4D provides high precision and professional performance. The top 360 horizontal line is suitable for ceiling installation, while the bottom 360 horizontal line is used for floor tile laying, achieving full coverage. The green laser has clear visibility and can be seen up to 30m away. It meets Class II safety standard with an output power of less than 1mW

2M 3 Heights Adjustable Alloy Extension Bar This laser level comes with a sturdy and adjustable extension bar, providing additional height and reach for those hard-to-reach areas, making it suitable for various projects.

2mm at 10m High Accuracy and Visibility The upgraded 360 Laser Level line is 4x more colorful than the red beam to assist your leveling jobs, brighter and clearer. High accuracy of 3mm at 10M with a working range of up to 30m (300LUX). The brightness of the laser can be adjusted according to the working needs. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, extending the laser range up to 60m with Line Laser Detector.With adjustable brightness, suitable for outdoor indoor,Safety level-Class II,

4 X 360 16 Lines Green Laser Spirit Level This Green Laser Level have 2 horizontal 360 plane, two vertical 360 plane. Each plane window launches 4 laser lines, which can be switched as you need. 4D self leveling laser level provides all-around level coverage with an accuracy of 2 mm 10 meters, a maximum indoor working range of about 30m. The green laser beams are 4x brighter than standard red beams. Laser class Class 0.8mW, safer to use.

Widely Used With IP4 waterproof and IP5 dustproof protective grade and shake-proof design, safe to use both indoors and outdoors. Perfect for home decoration, installation of the floor, framework, laying of tiles and wall charts, etc.Laser Class Class 2 (IEC EN60825-1 2014),

Safety Class II, power output

Self-Leveling & Manual Mode PREXISO Green laser level can be set in 2 modes, self-leveling mode and manual mode. Unlock side for self-leveling mode, the laser level 2 lines beam will be self-leveling within 4 of horizontal, and the beam will blink when out of Self-leveling range, and the top LED light will turn red. Then, on the "Lock" side for manual mode, long press the button for 3S to turn on the laser in manual mode, It will provide a straight line in any angle you want. NOTE Indoor use only

Brightness Adjustment The brightness of the laser level can be adjusted via "V" and "H". Press and hold the V button to decrease the brightness, and press and hold the H button to increase the brightness. The laser level can be used in different indoor environments. You can also adjust the laser brightness according to the usage environment.

With 3 self-levelling system Equipped with a self-checking calibration function, automatic levelling at 3 , but if the angle exceeds 3 , the laser light will continue to flash and the laser level will beep to remind you to reset it on flat ground.

HIGHLY ROBUST The laser level is jobsite-ready, with IP64 dust and splash water protection and robust housing, the device is very durable and suitable for rough conditions

Self-Leveling Mode & Manual Mode -- The cross line laser with slide switch allows you to set 2 modes. When self-leveling mode works, leveling and compensation range 4 1 , allows self-leveling when tilted to less than 4 degrees. In manual mode, the self-leveling function is disabled and the cross is locked to use the device at any angle.

DOUBLE LASER MODULE The Laser Level has Dual Laser Module that satisfies your different needs, you can toggle between vertical & horizontal lines, in addition, it has higher brightness and lower energy consumption. Laser Class Class 2