12v battery monitors shunt in comparison

Multiple measurement connections support XT60 XT60i, XH2.54 1-8S balance lead, XH 2.54 3pin, JST ETC to measure voltage. Support LiHv, LiPo, Lilon, LiFe, NiMh Cd battery and BEC output measurements.

Our battery equalizer equiped with larger LCD screen, it can visually displays the percentage of charge, and the battery voltage can be set.

9 Measurement Functions.One interface displays nine parameters including Voltage(0-200V), Current(0-500A), Power(0-60000W), Impedance(0-1000 ), Internal Resistance(0-999m ), Capacity(0-1000AH), SOC, Energy (0-9999kWh) and Running time(0-999h).(500A 50mV shunt included in package))

SCREW-FREE INSTALLATION This battery detector is mounted via a push-on terminal without the need for screws, making installation quick and effortless.

LCD DISPLAY Voltage current tester has large screen LCD, displays voltage, current, active power, energy at the same time

1% Accuracy Measurement Our shunt-type battery monitor is much more accurate than voltage-based battery monitors as it measures the actual energy flowing into and out of the battery through the battery shunt connected to the negative circuit. With the battery monitor with shunt, you can monitor real-time voltage, current draw, watts, charge level, and remaining time with an accuracy of 1%.

Practical to use you will receive 1 piece of battery meter, the battery voltage tester is featured with switched function button, you can press to check the cattery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is lower than 20 percent

Various Control Modes Voltage tester supports display control, can provide protocol, using 485, the secondary development can be carried out on the development tools such as serial assistant. Can switch addresses. Can switch addresses, respectively control 99pcs devices. Supports mobile APP control. After downloading and installing the APP, you can view all relevant data and curves on the APP through the built in Bluetooth connection, and set all functions through the mobile APP.

Battery Condition - High precision Current detection. You can read the battery bank like a fuel gauge, and also clear note the battery status.

MULTI-FUNCTION MEASURING INSTRUMENT The battery testing instrument is mainly used to measure the voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, remaining power, energy consumption and running time of various types of batteries, and display the measured value.

Big Screen The LCD large-screen of the battery tester displays voltage, current, active power, and energy simultaneously. Voltage test range 6.5-100V DC; ammeter test range 0-20A. Suitable for 6.5 100V DC Power Supply. For indoors, not outdoor.

BIDIRECTIONAL CURRENT DETECTION This device features an innovative bidirectional current detection capability for easy tracking of both charging and discharging processes without modifying wiring configurations.