Categories

ZADCCS EBC-B20H 12-72V Lithium Lead Acid Battery Capacity Tester Online Computer Software Support External Charger Discharger 20A for Battery Testing

Offer

Product description

  • During the discharge test, connect the battery pack to the "battery" connector of the tester through the clamp wire.
  • In the charging test, in addition to connecting the battery pack, the output end of the charger supporting the battery packneeds to be connected to the "charger" interface of the tester.
  • Turn on for charging. When it is detected that the charging current is less than the set value, it is determined to be full and the charging is turned off. (The tester does not control the charging current and voltage, only for detection and on-off control).
  • Automatic charging and discharging, the tester supports setting up to 5 steps, each step can be charging mode (requires external charger), or discharging mode. The charging and discharging test can be performed automatically by setting multiple steps.
  • When connected to a computer, it can be started by software control and record the voltage and current curve.

You might also be interested in these batteries.