SANTUO Soft Close Hinges for Toy Box, Lid Stay 105 Degree Open with Soft Close, Lid Support Hinges for a Quiet, Slow Close Experience, Fits Cabinets, Toy Boxes, and Furniture Durable Zinc Alloy
Show on Amazon
Show on Amazon
Offer
Offer ends in:
06Days
03hours
45minutes
27seconds
£ 4.49 | 1-2 Days
go to shop
Price trend
Product description
- Sturdy Lid Stay Wuth Soft Close Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
- Compact Design of LId Stay Hinge The compact design allows for installation in tight fit areas. The soft close hinges supports opening the lid at a maximum Angle of 105 degree.
- LId Stay Slow Closing Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
- Wide Usage Swing it your way! Our lid stay hinges can go on the left or right. They fit most lids with open angles between 90 and 105 , letting you keep your lid at whatever angle suits you best.
You might also be interested in these soft close hinges toy box.
SANTUO Soft Close Hinges for Toy Box, Lid Stay 105 Degree Open with Soft Close, Lid Support Hinges for a Quiet, Slow Close Experience, Fits Cabinets, Toy Boxes, and Furniture Durable Zinc Alloy
Sturdy Lid Stay Wuth Soft Close Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
Check price
2 Pack Gas Strut, Slow Down Lift Stay Support, Hinge Spring, Soft Close Hinges for Kitchen Cabinet Hinges Cupboard Door Toy Box, Heavy Duty Lid, Silver Electroplating, 100N
Look at installation diagram! 1## You can find the range of your door height and weight in the figure and install it according to the recommended installation method. 2##For example, if the height of your door panel is about 300mm and the weight of the door panel is less than 3.3kg, please install it according to the 80 installation diagram. 3##Measure, mark and install one end of the thick pneumatic rod at the recommended position on the movable plate, then install the other end to finish.
Check price
2 Pack | Toys Box Hinges Soft Close - HBL’ Chest Lid Support Hinges for Wooden Toy Box, Cedar, Storage Trunk & Benches, Made of Zinc Alloy, Safety & Heavy Duty.
Keep your loved ones safe with our Sturdy Lid Stay with Soft Close, designed to prevent slammed fingers and smashed toys or objects.
Check price
2 Pack Soft Close Toy Box Hinges for Heavy Curved, Round, Arched and Flat Lids - HBL' 150N Gas Strut Spring Safety Hinges to Slow Down and Slow Close, Also Works for Flat Lids.
Important Info Before You Buy Make sure your box has at least 26MM depth. Each pair of gas hinges can hold up to 22.5KG. For the best performance and longer-lasting lids, we recommend installing both hinges.
free shipping
Check price
Douper 70N-120N Professional Soft Close Lid Support Hinge, Safety Hydraulic Lid Stay Automatic Slow Lowering Toy Box Damper Buffer for Storage Treasure Chest Cabinet Door, Pack of 2
SOFT CLOSE HINGES Lid will slow the descent when the opening angle is less than 70 . Douper hydraulic lid stay for exclusively slowing the descent, holding up without slamming shut and protecting your fingers from being crushed
free shipping
Check price
2-Pack Soft Close Hinges for Toy Boxes, Wooden Chests, Cedar Storage, Trunks & Benches | Tension Adjustable Slow Down Chest Hinges.
Super Easy Installation Just use the provided template no need to break out the measuring tape. Watch the simple step-by-step video in the manual for a quick and hassle-free setup in minutes.
free shipping
Check price
Morinbo Toy Box Soft Close Hinges, Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)
KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
Check price
Soft Close Hinges for Toy Box, Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)
Compact Design The lid support hinge has a compact design and can be installed in tight areas. It allows the lid to be opened at an angle of up to approximately 105 degrees, suitable for a variety of storage solutions such as toy boxes and overhead cabinets.
Check price
Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2
LID STAY WITH SOFT CLOSE FOR TOY BOX-- The Lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight 12-21 lbs, Height 18-19 inch. The hinge will not applicable with the lid at width more than 27 and height over 18 .
free shipping
Check price
Douper Lid Support Hinge Soft Close Toy Box Hinges Safety Hydraulic Lid Stay for Top-Opening Chest and Upward-Opening Cabinet with Easy-to-Install Card Pack of 2
AUTOMATIC SLOW LOWERING Perfect to close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers
free shipping
Check price
Lid Support Hinge BADALU Toy Box Hinges Soft Close,Heavy Duty Lid Stay Hinges Perfect for Cabinet,Closet,Wardrobe or Toybox 110 Degree (1 Pair)
Lid Support Hinge Heavy Duty & Soft Close - The enhanced version has the advantages of strong bearing capacity,maximum Weight of 35 lb. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for cabinet,closet,special overhead kitchen cupboard,wardrobe lids, etc.
free shipping
Check price
ZENVALY Gas Strut, 2 Pcs Slow Close Hinges, Soft Close Gas Spring, Lift Stay Support, Soft Open Lid Stay Gas Spring Gas Lift Support Hinges for Kitchen Cabinet Cupboard Desk Toy Box Cabinet, 100N
High Quality Raw Material ZENVALY gas lift is made of outstanding steel with high strength and smooth surfaces, which is durable and practicality, stable and safe for long time use. The soft close hinges made of high-strength material have stronger load and flexible switch.
Check price
JZK 2X Gas Hydraulic strut Stay Lift Hinge Piston arm Damper 100N for Heavy Flap Door, Soft Close lid Support for Large Toy Box lid, Cupboard Door, Storage Chest lid
Force 100N (each strut), load bearing about 10kg (each strut), if you use two struts at the same time, the load bearing will be 20kg. Note Make sure your door weight is similar to the strut's force, otherwise, if the door is too lightweight, the door will not be closed.
Check price
QBOSO Lid Support Hinge in Satin Nickel Folding Lid Stay Hinge with Soft Close, Perfect for Toy Box/Drawer/Window/Wardrobe/Cabinet Door,22lb(Scimitar Style 1pair)
These elegant form of support hinges are well made and designed to support the lids of small box, such as toy box, cabinet,closet,wardrobe lids,The arm with graceful body curve adds classic luxury to your furniture.
Check price
JIZZU 2Pcs Soft Close Lid Support Hinges with Screws & Hex Key, Satin Nickel Drop Down Hinges Support 40lb, Folding Lid Stay Hinges for Kitchen Door Cabinet Cupboard Wardrobe Toy Box Lift Up Stay
Wide Application The lid stay hinges can be widely used as safety hinges for toy box, cabinet hinges, kitchen cupboard hinges, cupboard hinges, piano hinges, wardrobe hinges and so on
Check price
2 Pack Lid Support Hinge,Zinc Alloy ABS Chest Lid Support Hinges Slow Close Function for Wooden Toy Box,Box Window Cabinet Door Furniture, Storage Treasure Chest Cabinet Door
U-Slot Anti-Drop Safety System Chest Lid Support Hinges for Wooden Toy Box made U-channel design actively prevents accidental detachment during use. Dual-stage locking ensures door remains securely supported at any open angle without sliding or wobbling.
Check price
ASelected Pack of 2 Lid Support Safety Hinges for Toy Box Hold 40Lb Lid Stay Lift Up Buffer Hinge for Cabinet Cupboard Wardrobe Toy Box Adjustable Angle 75° 90° 110°
Can be used on a horizontal lid, a vertical lid or a drop down lid
Check price
2 Pack | 15KG Gas Strut Spring Hinges for Heavy Lids to Keep Stay, Slow Down and Soft Close, Hydraulic Hinges for Toy Box Chest, Bench, Toolbox and Basement Floor Door
Note The box depth must be greater than 25.4CM for proper installation.
free shipping
Check price
STARVAST 2 Pack Lid Support Hinge with Soft Close, Adjustable Lift up Stay Support Buffer Hinge Toy Box Hinge Support Drop Lids of Cabinet Support 40lb/2pcs
HIGH QUALITY MATERIAL The cabinet hinge is made of high quality zinc alloy with satin nickel; ensure durable and long service time
Check price
200N 1PCS Box Hinges Soft Close, Soft Close Hinges for Toy Box, Soft Close Cabinet Hinges and Slow Closing Lid Support Hinge (1, More Large)
Sturdy Enough Soft close hinges, 200N 1pcs heavy-duty gas struts can support lids up to 44 lbs
Check price