10Pcs 18650 Lithium Battery Charging Board MINI USB Charging Board 5V 1A TP4056 Lithium Battery Charge Module
Show on Amazon
Show on Amazon
Offer
i
£ 5.99
£ 4.49 | 1-2 Days
go to shop
Price trend
Product description
- 18650 lithium battery charger board input voltage is 5V, B + positive then the lithium battery, B- then negative lithium batteries.OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.
- TP4056 charging module charging voltage is fixed at 4.2V, and the charging current can be set externally through a resistor. When the charging current reaches the final float voltage and drops to 1 10 of the set value, the TP4056 will automatically terminate the charging cycle.
- When the input voltage (AC adapter or USB power supply) is removed, the TP4056 automatically enters a low current state, reducing the battery leakage current to less than 2uA.TP4056 can also be placed in shutdown mode when there is power supply, reducing the power supply current to 55uA.
- Battery charging board connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
You might also be interested in these tp4056 1a li ion lithium batteries charging module.
AZDelivery Compatible with TP4056 Micro USB 5V 1A 18650 Lithium 3.7 V Li-Ion Battery Charging Board Module Including E-Book! (Pack of 3)
It manages the constant current to constant voltage charging of a connected lithium battery and protects batteries that don't have their own protection circuit.
Check price
AEDIKO 20pcs TP4056 Micro USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board with Dual Protection Function
Protection Overcharge Over Discharge and Over-current Protection
Check price
TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions 3PCS
Light state no load the light not bright, red light for recharging, is full of green light.
Check price
APKLVSR 20PCS USB C 5V 1A Li-ion Lithium Battery Charger Module with Double Protection Functions
Input interface Type C USB. Input Voltage 5V; Battery Overcurrent protection current 3A; Charging cut-off voltage 4.2V 1%. Maximum charging current output 1000mA
Check price
AZDelivery Compatible with TP4056 Micro USB 5V 1A 18650 Lithium 3.7 V Li-Ion Battery Charging Board Module Including E-Book!
Automatically terminates the charge cycle when the charge current drops to 1 10th of the programmed value after the final float voltage is reached new Compatible with TP4056 does it automatically
Check price
10pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions
Charging cut-off voltage 4.2V 1%
Check price
BRAVECOW 10Pcs TP4056 5V 1A 18650 Micro USB Lithium Battery Charging Board Charger Protection Module
Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery, And still retains the input voltage wiring pads, can be very convenient DIY. Charging cut-off voltage 4.2V 1%; Maximum charge current 1000mA.
Check price
AZDelivery Compatible with TP4056 Mini USB 5V 1A 18650 Lithium 3.7 V Li-Ion Battery Charging Board Module Including E-Book! (Pack of 3)
Get a 3 piece deal on the AZ-Delivery TP4056 Modules. It manages the constant current to constant voltage charging of a connected lithium battery and protects batteries that don't have their own protection circuit.
Check price
TP4056 5V 1A 18650 Lithium Battery Charger Module, Type-C USB, Dual Function (3)
Protection Circuitry Integrated chip safeguards against overcharging, overdischarging, overcurrent, and short-circuit conditions.
Check price
20pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions
Charging cut-off voltage 4.2V 1%
Check price
Yctze 10pcs Micro USB 1A Lithium Battery Charger Protection Module Board, Suitable for TP4056 Charging, Battery, 3.7V Li-ion
Notice - The ammeter used to test current can only be connected to 5V input of board in series.The charging current is batter to be 0.37 times of the battery capacity, e.g. for a 1000mAH battery, the charging current should be 400. The charging connection wires cannot be too thin nor too long, otherwise it will result in a big connection resistance. Keep a good connection of contact with the battery. Reverse connection at output (battery) will burn out the chip, please be aware.
Check price
AZDelivery Electronic charger TP4056 micro USB TC-1A 18650 TP4056 charging module | Charger for lithium ION battery | Charging board with protection function | Integrated module 5/10 pcs
This 18650 battery charger has many protection functions against over-voltage, short-circuit, and over-temperature, which improve the safety of the battery. When you charge the battery of 1000 mAh, a current of 400 is sufficient. The charge interruption voltage is 4.2V + -1%.
Check price
Li-ion Charging Module TP4056 + DW01, 1A Charging Current, MicroUSB for 3.7V LiIon Battery/LiPo Batteries/1-Cell Battery/Single Cell Battery(MicroUSB with DW01 protection IC)
INPUT VOLTAGE - the input voltage can be applied via the contact surfaces IN + and IN- or via the micro USB port.
Check price
Youmile 20 pcs Lithium battery charging module 5V 1A Charging Module 18650 Lithium Battery Charger board Type-c USB with Protection Function with 26AWG red and black cable
What it does The lithium battery charging module adopts the Type-c USB female socket design, which can directly input the rechargeable battery with the mobile phone charger, and still retain the input voltage wiring pad, which is convenient for DIY.
Check price
TP4056 Micro USB 1A Li-ion Lipo Lithium Battery Charger Protection Module
Check price
Generic USB Type C 18650 TP4056 Lithium Battery Charger Module
Type C USB Input Features a Type C USB female base, allowing for direct charging using a phone charger. Retains input voltage wiring pads for flexible power source connections.
free shipping
Check price
TP4056 Type-C USB 5V 1A 18650 Charger Module Li-ion Charging Board TC 4056A with Dual Protection Functions(Pack of 12)
This product does not come with an independent lithium battery
Check price
Lithium Battery Charging Board LiPo Li-ion Battery Charger 18650 Micro MPPT Solar Charging Module with Overvoltage 1A 4.2V 3.7V(With Pin)
APPLICATION-- The Battery Module can automatically recharge and adjust the charging current according to the output capacity of the input power supply. It is a great lithium battery charger for solar powered system.
Check price
TP4056 1A 5V Lithium Battery Charging Board Module MICRO USB Interface Charging Protection 2-in-1 10 PCS
The input terminal is equipped with a MICRO USB socket, which can be directly used as input to charge the lithium battery with a mobile phone charger,
Check price
TP4056 Mini USB Charging Board - 5V 1A with Battery Protection, Dual Functions Lithium Battery Charge Module
TP4056 charging module charging voltage is fixed at 4.2V, and the charging current can be set externally through a resistor. When the charging current reaches the final float voltage and drops to 1 10 of the set value, the TP4056 will automatically terminate the charging cycle.
Check price