WhichOne Logo
    Categories
    Categories

    for EVGA 2x8 Pin to 16 Pin 90° 12VHPWR Cable Type A 60cm for RTX 4090/4080 | for EVGA/SuperFlower 2x8 to 16 Pin cable, Type A 4-pin on bottom. 60cm, 600W. For G7/G6/G5/G3/G2/P6/P5/T2. NOT for GQ/1000PS

    for EVGA 2x8 Pin to 16 Pin 90° 12VHPWR Cable Type A 60cm for RTX 4090/4080 | for EVGA/SuperFlower 2x8 to 16 Pin cable, Type A 4-pin on bottom. 60cm, 600W. For G7/G6/G5/G3/G2/P6/P5/T2. NOT for GQ/1000PS

    Offer

    amazon
    £ 10.99
    free shipping | 1-2 Days
    go to shop

    Product description

    • TYPE A — 4-PIN ON BOTTOM | VERIFY BEFORE ORDERING
    • This is the Type A configuration: the 4-pin sense wires are positioned on the bottom side of the connector (closer to the GPU PCB). Optimized for graphics cards with thick backplates or limited clearance above the power connector.
    • Type A and Type B look similar — verify your GPU orientation before ordering. Type B (4-pin on top) available for different layouts.
    • PRECISE EVGA/SUPERFLOWER COMPATIBILITY — VERIFY YOUR PSU MODEL FIRST
    • Designed exclusively for EVGA/SuperFlower modular PSUs with 8-pin modular ports: G7/G6/G5/G3/G2/G1+/GA/GM/GT, P+/P6/P5/P3/P2/T2, B5/B3, PQ/PS/GS, SuperFlower Leadex Titanium/Platinum/III.
    • NOT compatible with: EVGA GQ series (650GQ/750GQ/850GQ/1000GQ), 1000PS/850GS/1050GS, or any Corsair/Seasonic/Thermaltake PSU. Using this cable with an incompatible PSU WILL damage your hardware.
    • 90° ANGLED — REQUIRES ONLY 18-20MM CLEARANCE The 90-degree angled 12VHPWR connector reduces clearance requirements to just 18-20mm above the GPU power port, compared to 35mm+ for straight connectors. Solves side panel clearance issues in small form factor cases and full-tower builds with tall GPUs. No adapter needed — direct PSU-to-GPU connection.
    • 16AWG WIRE — FULL 600W SUPPORT — BOTH 8-PIN ENDS REQUIRED
    • Constructed with 16AWG wire for full support of 600W power delivery to RTX 4090/4080/4070/3090Ti and other PCIe 5.0 GPUs with 12VHPWR 16-pin (12+4 pin) ports.
    • Both 2x 8-pin connectors MUST be plugged into your PSU — using only one 8-pin end will NOT provide sufficient power and may cause system instability or damage. 60cm length for clean cable routing.
    • FACTORY-TESTED — SAFE & RELIABLE Each cable undergoes strict factory continuity, pinout, and high-current testing. Premium terminals with high-current single-split 4-spring design for stable contact.
    • Turn off PC power and unplug the power cable before installation. Do NOT force connectors — align the keying and push until fully seated.

    You might also be interested in these cables.