Categories

sourcing map #14x4" Self Drilling Screws with Rubber Washer 50pcs | Zinc Plated Steel,Roofing Hex Head Self Tapping Screws with EPDM Washer for Metal to Metal

Offer

Colour: Silver

sourcing map #14 x 3-9/16 Self Drilling Screws with Rubber Washer, 100pcs Zinc Plated Steel Roofing Screws Hex Head Self Tapping Screws with EPDM Washer for Metal to Metal
Black
sourcing map #12x2-1/2 Self Drilling Screws with Rubber Washer 100pcs
silver/metallic
sourcing map #14x4 Self Drilling Screws with Rubber Washer 50pcs | Zinc Plated Steel,Roofing Hex Head Self Tapping Screws with EPDM Washer for Metal to Metal
Silver

Product description

  • Thread Dia.: #14 (6.3mm); Length(not include hex head): 4"(100mm); Thread Pitch: 1.8mm; Hex Head Size: 10x5.9mm / 0.39" x 0.23"(Hex WidthxT); Flange Dia.: 12mm / 0.47"; Washer Size: 16 x 3.5mm / 0.63" x 0.14"(D*T); Screw Drilling Range (Plate Thickness): 2-6mm Material: Both the screw and the metal washer are made of carbon steel, a zinc-plated surface finish, which is corrosion-resistant; the black washer is made of EPDM, which is wear-resistant and oxidation-resistant.
  • Advantages: The hex washer head has a flange with an EPDM rubber washer on the bottom to prevent leaks, loosening and damage to mating surfaces.
  • When you tighten the self-drilling screw, a flexible black EPDM rubber washer bonded to the metal washer creates a tight seal.
  • Easy to use: Unlike self-tapping screws, these self-drilling screws drill a hole and tap a thread in one operation.
  • All you need to install them with a power drive tool.
  • Application: Hex head self-drilling screws are typically used in metal-to-metal and metal-to-wood applications.
  • Widely used in the electrical and industry, most commonly on thin metals, for example with roofing, steel studs, etc.

You might also be interested in these screws.