Etronix 600ma USB Charger for 6 to 8.4v (7.2v) NiMH Battery w/Tamiya Connector

Smart NiMH Charger This N8 HTRC charger is professionally designed for 2-8s NiMH NiCD battery(2.4-9.6V) of drone, airsoft, RC car, RC boat, etc. The inner chip uses advanced and accurate - V detection technology to judge whether the battery is full and avoid over-charging. Through the trickle charge to ensure that the battery is fully full, improve the battery life.

This LiPo battery USB charger is specifically designed for 8.4V NiMH NiCd batteries and comes equipped with an Tamiya PLUG. Before use, please ensure that the voltage (8.4V) is compatible. The input is DC 5V 2A, output is 8.4V 250mAh, connector is USB to Tamiya Plug

Intelligent nimh charger charge for nimh 2-10S battery, 2.4v 3.6v 4.8v 6v 7.2v 8.4v 9.6v 10.8v 12v nimh, it can automatically detect the battery voltage, switch to the corresponding charge mode, Se si riscontrano problemi durante l'uso, si prega di contattare il nostro servizio clienti.

Compatibility This battery USB charger is specifically designed for 8.4V Ni-MH Ni-CD Battery Pack and comes equipped with an Tamiya KET 2P PLUG. Please refer to the Product Details page image to confirm the connector plug models And battery voltage before placing an order.

Compatibility This battery USB charger is specifically designed for 7.2V Ni-MH Ni-CD Battery Pack and comes equipped with an SM-2P PLUG. Please refer to the Product Details page image to confirm the connector plug models And battery voltage before placing an order.

NIMH NICD Battery Charger melasta Battery Charger it can automatically detect the battery voltage, switch to the corresponding charge mode, RC Battery Charger fit for 2.4V 3.6V 4.8V 6V 7.2V 8.4V 9.6V 10.8V 12V Battery Pack.

Battery Type 2 3A 9.6V 1600mAh 15.36Wh 10C Type NiMH Nunchuck Battery Pack in Series, ideal replacement batteries for your Airsoft Stock equipment

The built-in smart chip provides a comprehensive protection for the battery and charger temperature protection (for battery packs with temperature-sensitive resistors), short-circuit protection, reverse polarity protection, and overcharging protection.

8.4V 2400mAh High quality Ni-MH rechargeable AA battery pack with Tamiya plug.

This LiPo battery USB charger is specifically designed for 9.6V NiMH NiCd batteries and comes equipped with an Tamiya PLUG. Before use, please ensure that the voltage (9.6V ) is compatible. The input is DC 5V 2A, output is 9.6V 250mAh, connector is USB to Tamiya Plug

Etronix

Parameter The NIMH RC Battery dimension 156.2*47*22.8mm(6.14*1.85*0.89inchs); battery Weight 410g 14.46oz.

Charger has built-in safety protections against reverse polarity, short circuit, and over-current for protection.

Spektrum Accessories 3300mAh 7-Cell 8.4V Smart NiMH Hump Battery; IC3, SPMX33007C3H

The intelligent load identification chip blocks excessive current and from entering and protects the device from damage.

8.4V 1000mAh AA Ni-MH Rechargeable Battery Pack, Made of 7 higher capacity Ni-MH 1000mAh AA size cells

RC and airsoft charger - NiMH NiCD Charger for RC Car, Airplane and Airsoft battery packs 2.4V, 3.6V, 4.8V, 6.0V and 7.2V (2-6 Cells Pack), this charger does not work with lipo li-ion packs.

Specification - Battery Voltage 8.4V; Configuration 7S; Cell Voltage 1.2V; Capacity 4500mAh; Plug Traxas Connector.

Smart RC Battery Charger Smart Charge for NiMH NiCd battery pack (2.4V,3.6V,4.8V,6.0V,7.2V,8.4V,9.6V, 10.8V,12V Battery). Support RC helicopters, tamiya rc trucks, Airsoft gun, RC Cars and remote controlled toys battey. Charging time is 6-10 hours depends on your battery capacity.

Automatically adapt to USB input power, quickly and stably recharge the battery.