Corsair iCUE H115i RGB ELITE Liquid CPU Cooler (16 Dynamic RGB LEDs, 140 mm AF ELITE Series FDB Fans, iCUE Software Compatible - LGA 1700, 1200, 115X, 2066, and AM4 Sockets) Black, 280 mm Radiator

Corsair

CONTACT FRAME FOR INTEL LGA1851 | LGA1700: Optimized contact pressure distribution for longer CPU life and better heat dissipation ARCTIC's

ENHANCED CPU COOLING - The MAG CORELIQUID A13 Series utilizes an enlarged copper cold plate for off-center CPU hotspots as well as more internal micro-channels that increase the surface-area-to-volume ratio for improved heat dissipation The CORELIQUID A13 Series is equipped with a high-performance pump that operates at speeds up to 3800 RPM.

ARCTIC

Simple, High-Performance All-in-One CPU Cooling: Renowned CORSAIR engineering delivers strong, low-noise cooling that helps your CPU reach its full potential Efficient, Low-Noise Pump: Keeps your coolant circulating at a high flow rate while generating a whisper-quiet 20 dBA Convex Cold Plate with Pre-Applied Thermal Paste: The slightly convex shape ensures maximum contact with your CPU’s integrated heat spreader, with thermal paste applied in an optimised pattern to speed up installation RS120 Fans: RS fans create strong airflow with the high static pressure necessary to drive air through the radiator.

All-in-One CPU Cooling Made Easy with iCUE

Simple, High-Performance All-in-One CPU Cooling: Renowned CORSAIR engineering delivers strong, low-noise cooling that helps your CPU reach its full potential Efficient, Low-Noise Pump: Keeps your coolant circulating at a high flow rate while generating a whisper-quiet 20 dBA Convex Cold Plate with Pre-Applied Thermal Paste: The slightly convex shape ensures maximum contact with your CPU’s integrated heat spreader, with thermal paste applied in an optimised pattern to speed up installation RS120 ARGB Fans: RS ARGB fans create strong airflow and high static pressure, with easy ARGB control via a compatible motherboard.

【High Performance Cooling Head】Using 0.1mm pitch high quality copper base, plus the swirl version design with illuminated logo to create a unique pump head, the water cooling head has a life span of up to 40,000 hours and a speed of up to 2600RPM±10%, which ensures long and excellent CPU cooling 【Better Cooling】Water cooling head with full purple copper mirror plane base + 240 size black aluminum fin cooling plate + polymer compilation protection water pipe + standard configuration 120mm ARGB fan to create a low resistance, high cooling, low evaporation and high life time all-in-one water cooling coole 【ARGB Divine Light Synchronization】 The ARGB of the fan and water cooling head are synchronized with the 5V 3pin on the motherboard to achieve light synchronization, 1600W colour soft light effect, efficient cooling while providing rich lighting effects (to create a dazzling world of light), supporting light effects in series to avoid insufficient light slots 【2 PWM Fans】 With TL-C12C-S ARGB balanced fan x 2, speed up to 1550RPM±10%, size 120*120*25mm, noise ≤ 25.6DBA, interface: 4pin PWM, air pressure: 1.5mmH2O(MAX), air volume: 66.17CFM(MAX), S-FDB bearing can solve the problem of hanging mode With PWM and ARGB function, the speed can be adjusted automatically according to the CPU temperature, which can provide strong airflow and lower noise, ARGB light colour can be manually adjusted the light colour 【Wide Compatibility】Support Intel: LGA 1150/1151/1155/1156/1200/1700/1851; AMD: AM4/AM5,with dual-platform all-metal black fasteners, simple installation method, can be well installed to The case width is recommended to be larger than 250mm

Corsair

【Unique Pump Head】The octagonal shape cold pump head adopts the exclusive frame of the 4th generation water pump, the rotating rectangular design and the ARGB halo under the luminous logo mark creates a colorful visual experience, and the service life of the cold pump head is up to 40,000 hours with a rotation speed of up to 2800 RPM ± 10%, ensuring that the CPU has excellent heat dissipation over a long period of time 【Excellent LED Lighting Effect】The ARGB fan and water cooling header are synchronized with 5V 3pin on the motherboard to achieve light synchronization, 1600W color soft light effect, efficient cooling while providing rich light effect, support light effect series and motherboard synchronization to avoid insufficient light interface 【High Airflow Output】The airflow provided by the vents can reach up to 66.17 CFM, providing everything needed to run the latest Intel or AMD performance while suppressing heat from high-end processors and increasing overall cooling efficiency. 【Excellent Bearing】 The cooling fan adopts the carefully developed Stably-FDB magnetic stabilization bearing, which solves the problem of fan blade shaking in pendant mode, increases the stable balance of the fan, reduces the fan noise to a very low level, and at the same time provides the required cooling capacity and prolongs the service life of the fan. 【Convenient Installation】AIO Cooler Support, AMD and Intel Slot Supported, AMD Supported: AM4/AM5, Intel: LGA1150/1151/1155/1156/1200/1851/1700, Comes with Accessories That Can Be Installed on Corresponding Platforms, Installation Is Simple, Can Be Installed According To Instructions And Tutorials

【Better Cooling】 Water block with full copper mirror plane base + 360 specification black aluminum fin cold plate + high polymer woven protective water pipe + standard 120mm argb fan to create low resistance, high cooling, low evaporative, long-life integrated water-cooled cooler. 【 Heat Sink Parameters 】 The size of the CPU water-cooled heat sink is 397 * 120 * 27mm, the length of the water conduit is 450mm, and the water pump speed is 5300RPM ± 10%. Under the synchronous operation of the three cpu fans and the cooling head, the heat sink can effectively cool the CPU temperature. 【High-performance Cold Head】 Using high-quality copper bottom with 0.1mm spacing, plus aluminum alloy cover and high-strength acrylic top cover, using mirror plating and reflection process to create an exclusive pump head, and the speed is up to 5300RPM±10 %, which ensures long-term, excellent cooling of the CPU. 【3 PWM Fans】TL-E12B-S V2 balanced fan×3, the speed can reach 2000RPM±10%, the size is 120*120*25mm, the noise is≤27.7DBA, the interface: 4pin PWM, the wind pressure: 2.87mmH2O(MAX), Air volume: 72.37CFM (MAX), S-FDB bearing can solve the problem of cpu fan chattering in hoisting mode, with PWM and ARGB functions, can automatically adjust the speed according to the CPU temperature, can provide strong airflow and lower noise, ARGB Light color can be adjusted manually. 【Compatibility Extensive】Support Intel: LGA 1150/1151/1155/1156/1200/1700/1851; AMD: AM4/AM5, the cpu water cooler with dual platform full Metal black buckle, easy to install, can be well installed on the corresponding CPU platform, the chassis width is recommended to be greater than 250mm.

【Better Cooling】 The cooler adopts the fourth generation pump head + 360 cold row size black aluminium fin heat sink plate + protective preparation mesh water pipe + standard configuration 120mm ARGB fan, to create a low vibration, high heat dissipation, low evaporation, high life span of the one-piece water-cooled cooler area unit. 【Unique Pump Head】 The octagonal shaped cold pump head adopts the exclusive frame of the 4th generation water pump, the swirling rectangle design and the ARGB halo under the logo luminous marking creates a colourful visual experience, and the life of the cold pump head is up to 40,000 hours with a rotation speed of up to 2800 RPM ± 10%, which ensures that the CPU is provided with excellent heat dissipation for a long period of time 【Excellent LED Lighting Effect】Fan and water-cooling header ARGB sync with 5V 3pin on the motherboard to achieve light sync, 1600W colour soft light effect, efficient cooling while providing rich light effect, support light effect series and motherboard sync to avoid insufficient light interface. 【Fan Parameters】Equipped with 3 fans TL-C12B-S V2 fan, Speed:1500RPM±10%, size: 120*120*25mm, noise≤23dBA, power supply interface: 4PIN PWM, light interface: 5V/3PIN ARGB, airflow: 66.17CFM(MAX), with PWM and ARGB function, can automatically adjust the speed according to the CPU temperature, provide strong airflow and lower noise, ARGB light colour can be manually adjusted.