Weewooday 18650 Lithium Battery Charger, 40pcs TP4056 Charging Module with BMS, 5V Micro USB, 1A, 4.2V Output
Show on Amazon
Show on Amazon
Offer
i
£ 16.02
free shipping | 1-2 Days
go to shop
Product description
- Package contents you will get 40 pieces charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and *************************************************************
- Functional usages input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A; Connect the battery to the B+ B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full
- Product information the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY; Charging cut-off voltage 4.2V, max charge current 1000 mA
- Applicable occasions the battery charging board is suitable for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate
- Warm notice please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly; The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board
You might also be interested in these tp4056 lithium battery chargers module.
AEDIKO 20pcs TP4056 Micro USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board with Dual Protection Function
Protection Overcharge Over Discharge and Over-current Protection
Check price
TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions 3PCS
Light state no load the light not bright, red light for recharging, is full of green light.
Check price
10Pcs 18650 Lithium Battery Charging Board MINI USB Charging Board 5V 1A TP4056 Lithium Battery Charge Module
18650 lithium battery charger board input voltage is 5V, B + positive then the lithium battery, B- then negative lithium batteries.OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.
Check price
AZDelivery Compatible with TP4056 Micro USB 5V 1A 18650 Lithium 3.7 V Li-Ion Battery Charging Board Module Including E-Book! (Pack of 3)
It manages the constant current to constant voltage charging of a connected lithium battery and protects batteries that don't have their own protection circuit.
Check price
TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions 3PCS
Light state no load the light not bright, red light for recharging, is full of green light.
Check price
ABSOK Battery Charger Module USB TP4056 3.7V 4.2V to 9V 5V 2A Charge Discharge Integrated Step Up Module,18650 Lithium Li-ion Battery Charger Module(6 PCS)
Material Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging
Check price
TP4056 Mini USB Charging Board - 5V 1A with Battery Protection, Dual Functions Lithium Battery Charge Module
TP4056 charging module charging voltage is fixed at 4.2V, and the charging current can be set externally through a resistor. When the charging current reaches the final float voltage and drops to 1 10 of the set value, the TP4056 will automatically terminate the charging cycle.
Check price
Lithium Battery Board, Li Ion Battery Module Lithium Battery Module Lithium Battery Charging Board Stable 3.7V 4.2V Functions for TP4056
Comprehensive Safeguard your lithium battery from burnout during charging or discharging with our advanced module.
Check price
UMTMedia® 1 X Micro TP4056 5V USB Lithium Battery Board Charger Module For Arduino PI
Works with most lithium-ion batteries and popular platforms like Arduino and Raspberry Pi.
free shipping
Check price
APKLVSR 20PCS USB C 5V 1A Li-ion Lithium Battery Charger Module with Double Protection Functions
Input interface Type C USB. Input Voltage 5V; Battery Overcurrent protection current 3A; Charging cut-off voltage 4.2V 1%. Maximum charging current output 1000mA
Check price
TECNOIOT 10pcs TC4056 1A 5V Lithium Battery Charging Module Mini/Micro USB Interface compatible with TP4056
TECNOIOT
Check price
SWLECA TP4056, Lithium Battery Charger Module - Capacitor Protection Board Lithium Titanate Battery Balance Protection Module, Advanced Battery Protection Module
Easy Installation Suitable for any 1 6S battery or capacitor, the single protection board is easy to install. For less than 6S, connect it from the negative pole, and leave any excess wires empty.
Check price
AOICRIE 10Pcs TP4056 Charging Module Battery Charging Board with Battery Protection 18650 BMS 5V Micro USB 1A 186 50 Charge Module (10pcs)
What you receive there are 10 pieces TP4056 charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace
Check price
Li-ion Charging Module TP4056 + DW01, 1A Charging Current, MicroUSB for 3.7V LiIon Battery/LiPo Batteries/1-Cell Battery/Single Cell Battery(MicroUSB with DW01 protection IC)
INPUT VOLTAGE - the input voltage can be applied via the contact surfaces IN + and IN- or via the micro USB port.
Check price
10Pcs 18650 Lithium Battery Charging Board Micro USB Charging Board 5V 1A TP4056 Lithium Battery Charge Module
18650 lithium battery charger board input voltage is 5V, B + positive then the lithium battery, B- then negative lithium batteries.OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.
free shipping
Check price
Yctze 10pcs Micro USB 1A Lithium Battery Charger Protection Module Board, Suitable for TP4056 Charging, Battery, 3.7V Li-ion
Notice - The ammeter used to test current can only be connected to 5V input of board in series.The charging current is batter to be 0.37 times of the battery capacity, e.g. for a 1000mAH battery, the charging current should be 400. The charging connection wires cannot be too thin nor too long, otherwise it will result in a big connection resistance. Keep a good connection of contact with the battery. Reverse connection at output (battery) will burn out the chip, please be aware.
Check price
18650 Lithium Battery Charger, 18650 Battery Charger Stable for TEC4056 TP4056 3-Speed Current
Premium Material 18650 battery charger is made of high quality material, which enables it to work for a long time. Simple structure, durable and reliable, you can use it for a long time.
free shipping
Check price
Generic USB Type C 18650 TP4056 Lithium Battery Charger Module
Type C USB Input Features a Type C USB female base, allowing for direct charging using a phone charger. Retains input voltage wiring pads for flexible power source connections.
free shipping
Check price
5V 1A Micro USB Charger Module 18650 Lithium Battery Charging Board with for Protection for TP4056 Project Dura Lithium Battery Charger Module
Notice please note that the should disconnect the load OUT on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly; The ammeter for testing current can only be connected in series with the 5V input of the charging board.
Check price
TP4056 10Pcs 18650 Lithium Battery Charging Board - Micro USB, 5V 1A with Battery Protection and Dual Functions
TP4056 charging module charging voltage is fixed at 4.2V, and the charging current can be set externally through a resistor. When the charging current reaches the final float voltage and drops to 1 10 of the set value, the TP4056 will automatically terminate the charging cycle.
Check price