Multicomp Pro MP780050 Mini AC Leakage Current Meter

3.5 digit lcd display

ADVANCED AC DC CURRENT LEAKAGE METER This current leakage clamp meter is designed to accurately measure automotive dark current and leakage current for quick automotive leakage current detection, power consumption current detection, motor starting current measurement, and engine charging current measurement. This versatile current clamp tester quickly identifies problems such as broken wires, leaks, and improper grounding.

Metrel

HOW TO USE 1. The meter will automatically calibrate when it is turned on, and it will display ol when it is finished, and it will automatically enter the resistance measurement mode. 2. Automatically shut down after reaching the set shutdown time, the meter will flash for 30 seconds before the automatic shutdown, and then press the power button to delay the switch on time.

AC DC CURRENT TESTER This amp clamp device measures DC current as well as AC. Small current drain can be tested via the clamp, e.g. to measure a battery drain on a car, without having to disconnect any wires.

Ergonomic and lightweight Auto range, 2 3 times s sampling rate LCD backlight, data hold Auto power off, low battery indication

100 uA (0.1mA) high resolution measurement on 200 mA range

1mA Sensitivity 1mA sensitivity when measures AC DC current by clamp.

AC DC CLAMP METER This clamp meter can accurately measure AC DC current, AC DC voltage, temperature (thermocouple included), NCV, capacitance, frequency, resistance, continuity and diode. Good help for troubleshooting the household solar system, automotive and industrial electrical issues, perfect for electricians, DIY, professionals, etc.

Small in size, light in weight, compact structure, it is convenient to carry.

Auto power off and low battery indicator

This Mini True RMS 6000 Counts clamp meter measures DC and AC current by jaw from 1mA to 100A, DC and AC voltage to 600V

True-RMS This clamp multimeter can accurately measure AC DC Current, AC DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs, factories and household.

AC DC Digital Clamp Multimeter 4000 Counts Auto Manual Ranging optional on AC Current. Auto Range on DC Current, AC DC Volt, Resistance, Capacitance, Frequency, Duty Cycle. Backlit Screen, Data Hold, Temperature( ), Diode Test, Relative Value, Continuity teat with Alarm buzzer

Identify the impedance of the ground loop without disconnecting the grounding system.

Grounding resistance, loop resistance measurement, range 0.010 1200

UNI-T UT251A UT251C RS-232 Auto Range High Sensitivity Leakage Current Clamp Meters with 99 Data Logging Ammeter Multitester

Strong anti-interference Alarm function Data storage (500 sets)

TRMS 6000 Counts Multimeter Built-in clamp sensor, true RMS measurement method, can accurately measure DC voltage 0.1mV 600V, AC voltage 1mV 600V, AC and DC current 10mA 400A, resistance 0.1 60M , capacitance 6nF 60mF, frequency 9.999Hz 9.999MHz, temperature -20 C 1000 C, duty cycle 0.1% 99.9%.

35mm jaws,Measure leakage current and loop resistance,Rugged design,More than 8 hours average battery life even when continuously operating