MOPEI Airless Spray Gun with Tip Guard and 517 Tip, Compatible with Graco Sprayer, 3600 PSI

Accessories for a Comfortable & Safe Painting Experience - Reduce strain on your back with the 12" tip extension, allowing you to easily reach high areas. Protect your eyes from atomized paint with anti-fog goggles, and quickly clean the spray gun with the included cleaning kit. Ensure a leak-free experience by tightening joints with the wrench set.

It is for use with any airless paint sprayer with female fittings.

Lightweight gun with ergonomic handle and extra-light two-finger trigger for maximum operating comfort

PROFESSIONAL PAINTING RESULTS 3600 PSI Maximum Pressure, the filter installed in the paint sprayer gun could filter the paint and reduce the clogging of the nozzle. Adjust the nozzle's spray pattern based on aperture size to meet project requirements, achieve expert-quality results with the AtoMax airless spray tip, minimizing overspray for a smooth, even finish.

For water- and solvent-based materials such as emulsion and latex paints, enamels, vinyl, matt, silk, gloss, varnishes, acrylic paints, wood preservatives, stains, primers, undercoats, plant protection products, disinfectants, oils and more. (Not for flammable materials)

Never allow the device to run dry. Operations without liquid (water or paint) leads to increased wear and damages the pump

High-quality materials Airless paint sprayers tungsten steel is used as the material, which has good rust and corrosion resistance, the gun body is pressure-resistant and wear-resistant, it is made of alloy and is durable, it has built-in anti-aging, it has high strength, high pressure resistance, long service life, and can be replaced, low cost and other characteristics.

High-powered 650W motor Our Airless Paint Sprayer Gun boasts an impressive 650W motor, providing the power needed for fast and efficient painting tasks, saving you valuable time and effort.

High-quality materials Copper electroplated zinc alloy was used as the material, with good rust and corrosion resistance. Pressure-resistant and wear-resistant gun body, made of alloy material, durable, built-in anti-aging. With high strength, high pressure resistance, long service life and low replacement cost.

800W &1300Ml Split motor and spraying handle to reduce the handheld weight and 8.2ft 2.5m premium tube brings more flexibility of your spraying With 800 watt power, 1300ml capacity, Tilswall paint sprayer improve atomization effect to reduce overspray and highly customize to fit to your painting work, match covering speed and project size, performing a top-notch quality of work. Please note! When you are preparing to thin a paint, always thin it with thinner, not with water!

3-way adjustable paint jet can be adapted ideally to the object to be painted

The airless spray gun is perfect for varnishing and dispersion paints.Il fonctionne avec une pression maximale de 248 bars.Works with the nozzle.Connection type G 1 4 or G 7 8 male.

Excellent Performance It transports the painting materials through a high-pressure hose to the spray gun and releases pressure to realize atomization, forming a smooth and tight painting on the wall surface. This method does not require air atomization, resulting in less dispersion, a high utilization rate, and a good adhesion effect.

Airless Paint Hose Kit you will receive 5 pieces of airless spray gun parts, including an airless paint sprayer gun tip extension, a sprayer tip with nozzle seal, a hand tight tip guard, a rotary joint and an airless paint spray gun, which can satisfy your daily use and replacement requirements

High Efficiency The product uses a 1500W pure copper motor, the maximum spraying flow rate is up to 77.43oz min, and the spraying width is up to 9.84in. It is suitable for the coating of large areas and objects, and labor productivity is greatly improved

High Efficiency The product uses a 1500W pure copper motor, the maximum spraying flow rate is up to 77.43oz min, and the spraying width is up to 9.84in. It is suitable for the coating of large areas and objects, and labor productivity is greatly improved.

CONTROL YOUR PAINT FLOW Fully adjustable pressure by user-friendly knob, to give you ultimate control of paint flow for any project size.

It is compatible with many brand sprayers on the market. Additional lengths of hose extends the reach of your sprayer for peaks or second stories without diminishing performance .

For emulsion and latex paints for indoor use, When used with the supplied Standard spray attachment also suitable for water-based and solvent-based enamels, varnishes, protective wood-staining products, oils and many other materials

Innovative Side Feed The Tilswall Shark 800W paint sprayer improves the way you add paint. You can easily add paint from the side without turning the paint can, so you can make the most of every drop of paint easily and efficiently