Bosch Professional Circular Saw Blade Expert (for Wood, 165 x 20 x 1.5 mm, 12 teeth; Accessories: Cordless Circular Saw)

GARHWAL 100mm Bi-Metal Hole Saw - Suitable for cutting through materials such as steel, aluminium, copper, brass, wood and plastic. Features a vari-pitch tooth design for fast cutting and long life. Compared to other manufacturers, We prioritize quality over cost-cutting measures, which is why we do not manufacture low-quality hole saws.

SAFETY FIRST Please wear protective gear and keep your hands away from the saw blade while it is rotating. Also, ensure the saw blade is used within the specified range of use to avoid tooth breakage

Easy to Use Used on miter saws, circular saws, table saws, hand saws and sawing machines. After the saw blade is installed, it should be idling for a few minutes to ensure that there is no movement, swing and shake.

Easy to Use Used on miter saws, circular saws, table saws, hand saws and sawing machines. After the saw blade is installed, it should be idling for a few minutes to ensure that there is no movement, swing and shake.

Magnesium die cast blade case, safety cover and aluminium base plate

Powerful Motor with 6 Blades Featured with a 705W powerful pure copper motor, the compact circular saw provides a fast cutting speed of 3500 RPM for cutting wood, metal, tile, plastics, and PVC tube with ease. 6 Blades 2x24T TCT for wood cuts 2x60T HSS for wood and soft-metal cuts 2 x diamond blade for tile and plasterboard.

Multi-material 185 mm Japanese tungsten carbide tipped (TCT) blade included cuts wood, steel, aluminium, wood with embedded nails, plastic and more with no heat and no burrs and virtually no sparks when cutting mild steel.Bore 20mm

M42 bi-metal hole saw cut arbor pilot drill bit for aluminum, steel, stainless steel, iron, wood, and plastic.

Advanced Material These hole saw in matt black and frosted orange are created with high quality cobalt high speed steel with a high hardness(69HRC) and compressive strength, compared with high carbon, high chromium die steel, it has better toughness and wear resistance, strong and sturdy for long-term use.

This hole saw drill bit gives a fast clean cut. 38mm depth of cut - you can drill 38mm deep with this hole saw.

Packing 2 pieces of TCT circular saw blades, 2pcs reduction rings from 20mm to 16mm. Specification diameter 110mm 4inch, aperture 20mm (4 5 inch), number of teeth 40 teeth, maximum speed 13200 RPM.

Maximum cut at 0 degrees 66mm and 45 degrees 46mm

Electronic current limiter for overload protection

FRIENDLY REMINDER When disassembling and assembling the saw blade, be sure to firmly press and hold the orange lock shaft button (located on the side away from the blade).

Upgraded Version - Powerful Pure Copper Motor with 2 Blades Featured with a 1200W powerful pure copper motor, the circular saw provides a fast cutting speed of 5800 RPM for cutting laminate flooring, dry wood, plastics, PVC pipe, and plasterboard. 2 Blades 40T and 24T (185mm). (Note When installing replacement of the saw blade, to tighten or loosen the bolts, the rear axle lock button must be pressed at the same time.)

High-quality and robust biscuit jointer with a solid aluminium design and powerful 860 Watt performance for versatile butt and cabinet joints

100mm Hole Saw Can be used for plastic PVC pipe, cork desk desk, plasterboard, furniture and cabinets, and for installing handles and locks The door. The metal holesaw 100mm with the non-binding clean edge design, this hole saw cuts smooth and easy. And the spring on the drill bit would automatically pushes the disc out of the saw immediately after completing the hole.

Powerful Motor with 3 Blades Featured with a 580W powerful pure copper motor, the compact circular saw provides a fast cutting speed of 4000 RPM for cutting wood, metal, tile, plastics, and backerboard with ease. 3 Blades 24T TCT blade for cutting wood, plastic and other soft materials 44T HSS blade for cutting plastic and soft metal diamond blade for cutting tile and backerboard.

Ergonomic handles and large controls for comfortable working

Wide Application This electric hammer drill bit is adept at penetrating a variety of common wall materials, including brick, adobe, concrete, cement, cinder blocks, and stone. It is ideal for drilling into walls and hollow bricks for applications such as creating holes for air conditioning units, pipes, and more. The operation is straightforward, user friendly, and allows for rapid drilling.