Categories

Rennie Tool 6mm Cut x 42mm Flute x 6mm Shank 2F Spiral Up Cut Router Bit | Solid Carbide For Hardwood, Softwood, MDF, Plywood, Chipboard, PVC, Acrylic. Spiral 2 Flute 6mm Router Cutter Bit End Mill

Offer

Size:

1/16" x 12mm Flute (1/8" Shank)
10mm x 32mm Flute (10mm Shank)
10mm x 42mm Flute (10mm Shank)
10mm x 62mm Flute (10mm Shank)
12mm x 30mm Flute (10mm Shank)
12mm x 42mm Flute (12mm Shank)
12mm x 52mm Flute (12mm Shank)
16mm x 52mm Flute (16mm Shank)
1mm x 4mm Flute (1/8" Shank)
2.5mm x 22mm Flute (1/8" Shank)
2mm x 17mm Flute (1/8" Shank)
3.175mm (1/8") x 28mm Flute (1/8" Shank)
3mm x 12mm Flute (8mm Shank)
4mm x 12mm Flute (4mm Shank)
4mm x 12mm Flute (8mm Shank)
4mm x 17mm Flute (4mm Shank)
4mm x 25mm Flute (4mm Shank)
4mm x 42mm Flute (4mm Shank)
6mm x 12mm Flute (6mm Shank)
8mm x 22mm Flute (8mm Shank)
8mm x 42mm Flute (8mm Shank)
8mm x 52mm Flute (8mm Shank)

Product description

  • Cutting Diameter - 6mm / Flute Length - 42mm / Shank Diameter - 6mm / Overall Length - 70mm This solid carbide 2 flute up cut router cutter has a sharp cutting edge.
  • The spiral up cut design pulls the chips upwards which gives a very clean finish at the bottom of the cut.
  • As the chips are pulled upwards this can lead to some breakout / chipping at the top of the cut so if this is a concern then we would recommend using a 2 flute down cut router bit instead.
  • This spiral router bit can be used in CNC router machines, fixed head routing machines, hand held routers and desktop routers.
  • These 2F up cut router cutters are suitable for use on a wide range of materials such as hardwood, softwood, MDF, MFC, Laminate Board, Plywood, Particle Board, Insulation Panels, PVC, solid surface and Acrylic.
  • Manufactured from wear resistant micrograin carbide which results in a longer tool life.

You might also be interested in these routers.