Trend CraftPro Chamfer Pin Guided Bevel Router Cutter Bit, 1/4 Inch Shank, 25.5mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide Tipped, C049AX1/4TC
Price comparison
i
free shipping | 1-2 Days
go to shop
£ 5.95
go to shop
£ 34.80
free shipping | 1 Day
go to shop
Price trend
Product description
- PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
- TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
- PRECISION CUTTING The highly ground tip face is polished to 800-grit to ensure accurate cutting with a fine finish for professional routing results.
- SAFETY & COMPATIBILITY Longer shanks accommodate both handheld and table routers. Features a Safety K-Mark for optimal shank positioning. EN Shank Markings for visible cutter safety data.
You might also be interested in these large chamfer routers bit.
sourcing map Chamfer Router Bit 45 Degree 1/2" Shank 1-3/7" Cutting Height Edge Forming Router Bit for Woodworking
Suggested feed rate 8-12m min, suggested spindle speed 18000-24000RPM. The larger the tool diameter, the smaller the spindle speed should be.
Check price
Akylin Chamfer Router Bit 1/4 Inch Shank, 1-3/16" Cut Dia, 45-Degree V Groove, Carbide Edge Forming Bevel Router Bit, Chamfer Bit Miter Angle Milling Cutter, Perfect for Angled Edges-6.35 * 30 * 12
Precision Cutting Chamfer Router Bit with 15 32 Inch Cutting Height, 1-3 16 Inch Cutting dia, 1 4 Inch shank. For use on table mount router, handheld router
Check price
Chamfer Router Bits 1/4-inch Shank with 45 Degree 7/8 inch Cutting Length, Edge Forming Cutter Tungsten Carbide Tip for Woodworking
High quality material Made of tungsten carbide,Professional grade drill bit router.
Check price
Trend CraftPro Chamfer Router Cutter Bit, 1/2 Inch Shank, 38mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide Tipped, C045BX1/2TC
PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
free shipping
Check price
Yonico 13918 60 Degree Bevel Edge Forming Router Bit 1/2-Inch Shank
Silver induction brazing for maximum strength and durability
free shipping
Check price
KATUR 45 Degree Chamfer and Bevel Edging Router Bit, Carbide Tipped Chamfer Router Bit with 1/4 Inch Shank, Woodworking Milling Cutter (1/4" Shank 45 Degree)
Chamfer and Bevel Edging Router Bit 1 4" shank; 1.5" width; 0.69" depth; 45 degree
free shipping
Check price
Faithfull FAIRB81 Router Bit TC 45 Degree Chamfer 1/4in
With careful handling and under normal conditions, they will outlast HSS grade cutters many times
Check price
The Lord of the Tools 45 Degree Bevel Edging Router Bit with 8mm Shank Chamfer Cutter Groove Cutter Router Bit Wood Cutting Tool with Ball Bearing
Main function 8mm chamfered bearing planer head. The perfect circular slot milling cutter can be used for photo frames, bookcases, mirrors, cabinets, support devices, and other DIY lock slots for wall hanging.
Check price
Trend CraftPro Two Flute Self Guided Chamfer Router Cutter Bit, 1/4 Inch Shank, 12.7mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide Tipped, C049X1/4TC
PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
Check price
YONICO Chamfer Router Bits Edge Forming 45 Degree 1/2-Inch Shank 13923
This bit will cut 45 bevels and chamfers at 1-3 16" deep and high. This bit will also create a 90 angle miter joint. Can be used with stock up to 1-3 16" thick. Two flute carbide cutters and 1 2" Shank.
Check price
hsawbit 4pcs Guided Chamfer Router Cutter Bit Two Flute 1/4 Inch Shank, 22mm, 24mm, 26mm, 31mm Cut Diameter & 45 Degree V Groove,Edge Forming Cutter for Woodworking
hsawbit Chamfer Router Cutter Bit - The router bits shank 1 4 inch , Cut Dia. 22mm, 24mm, 26mm, 31mm. Ensures precise and smooth cuts, allowing for flawless finishing touches for woodworking.An essential tool for carpenters and DIY enthusiasts.
Check price
Trend Professional Miniature Chamfer 45 Degree Router Cutter Bit, 1/4 Inch Shank, 14.3mm Cut Diameter & 6.35mm Cut Length, Tungsten Carbide Tipped, MB/05X1/4TC
TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
free shipping
Check price
sourcing map Chamfer Router Bit 45 Degree 1/4" Shank 2/3" Cutting Height Edge Forming Router Bit for Woodworking, 2.26" (57.5mm) Length
Suggested feed rate 8-12m min, suggested spindle speed 18000-24000RPM. The larger the tool diameter, the smaller the spindle speed should be.
Check price
YSANO 1PC 1/4 Shank Large 45Degree Chamfer Bevel Edging Router Bit Woodworking Cutter Woodworking bits
Two flute carbide cutters and 1 4" Shank.
Check price
Mesee 4 Pieces 45 Degree Chamfer Router Bit Set, 1/4 Inch Shank Industrial Grade Top End Bearing Bevel Edge Forming Router Bits Cutter Woodworking Tool for Making Wooden Door Window Frames Cabinets
45 Degree Chamfer Router Bits with 4 different cutting diameter 3 8", 5 16", 1 4", 1 2"; Bearing Diameter 1 2"
Check price
Mesee 3 Pieces Chamfer Edge Forming Router Bit Set, 1/4 Inch Shank Chamfer and Bevel Edging Cutter Bits with Bearing Guide Woodworking Cutting Tool - 15/22.5/30 Degree Cutting Angle
Solid hardened steel bodies and premium C3 micro-grain tungsten carbide blades for sharper & longer lasting
Check price
sourcing map Chamfer Router Bit 1/4 Shank 3/8" Dia 45 Degree High Carbon Steel with Bearing for Carpentry Woodworking Cutter Tool
Shank Diameter 6.3mm; Cutting Angle 45 Degree
Check price
Bestgle 4pcs 1/4 Inch Shank Chamfer Router Bits with 45 Degree , Industrial Grade Edge Forming Bevel Woodworking Cutter Tool, Cutting Length 3/8" 5/16" 1/4" 1/2"
Solid Hardened Steel Bodies with Anti-Kickback Design, Build-up & Heat Resistant Teflon Coating.
Check price
Aopin 45 Degree Chamfer Edge Forming Router Bit 1/2-Inch Shank, Top Bearing Bevel Edge Forming Router Bits Cutter Woodworking Tool, Blue, Silver, 1Pcs
Warm Tips Cannot be used to cut metal and non wood materials.
Check price
Trend CraftPro Chamfer Router Cutter Bit, 1/4 Inch Shank, 19.1mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide Tipped, C044AX1/4TC
PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
Check price