Trend CraftPro Self-Guided Bevel Trim Router Cutter Bit, 1/4 Inch Shank, 18.5mm Diameter, 65 Degree Angle, Tungsten Carbide Tipped, C119X1/4TC
Offer
i
£ 16.60
£ 4.49 | 1-2 Days
go to shop
Price trend
Product description
- ACCURATE SURFACE ALIGNMENT Trimmers ensure precise alignment and shaping of surfaces, particularly with laminate or veneer. They trim flush once affixed to the workpiece. Some models have side-fences, while most are self-guided.
- TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
- PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
- PRECISION CUTTING The highly ground tip face is polished to 800-grit to ensure accurate cutting with a fine finish for professional routing results.
- SAFETY & COMPATIBILITY Longer shanks accommodate both handheld and table routers. Features a Safety K-Mark for optimal shank positioning. EN Shank Markings for visible cutter safety data.
You might also be interested in these routers bits chamfer.
Trend CraftPro Two Flute Self Guided Chamfer Router Cutter Bit, 1/4 Inch Shank, 12.7mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide Tipped, C049X1/4TC
PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
Check price
Faithfull FAIRB81 Router Bit TC 45 Degree Chamfer 1/4in
With careful handling and under normal conditions, they will outlast HSS grade cutters many times
Check price
Trend Professional Miniature Chamfer 45 Degree Router Cutter Bit, 1/4 Inch Shank, 14.3mm Cut Diameter & 6.35mm Cut Length, Tungsten Carbide Tipped, MB/05X1/4TC
TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
free shipping
Check price
Mesee 3 Pieces Chamfer Edge Forming Router Bit Set, 1/4 Inch Shank Chamfer and Bevel Edging Cutter Bits with Bearing Guide Woodworking Cutting Tool - 15/22.5/30 Degree Cutting Angle
Solid hardened steel bodies and premium C3 micro-grain tungsten carbide blades for sharper & longer lasting
Check price
Akylin Chamfer Router Bit 1/4 Inch Shank, 1-3/16" Cut Dia, 45-Degree V Groove, Carbide Edge Forming Bevel Router Bit, Chamfer Bit Miter Angle Milling Cutter, Perfect for Angled Edges-6.35 * 30 * 12
Precision Cutting Chamfer Router Bit with 15 32 Inch Cutting Height, 1-3 16 Inch Cutting dia, 1 4 Inch shank. For use on table mount router, handheld router
Check price
Bosch Professional 6 pcs. Trim & Edging Router Bit Set (for Wood, Ø 1/4 inch Shank, Accessory Router)
For routers with 1 4 inch tool holder of all power tool brands.
free shipping
Check price
Mesee 4 Pieces 45 Degree Chamfer Router Bit Set, 1/4 Inch Shank Industrial Grade Top End Bearing Bevel Edge Forming Router Bits Cutter Woodworking Tool for Making Wooden Door Window Frames Cabinets
45 Degree Chamfer Router Bits with 4 different cutting diameter 3 8", 5 16", 1 4", 1 2"; Bearing Diameter 1 2"
Check price
Trend CraftPro Self-Guided Bevel Trim Router Cutter Bit, 1/4 Inch Shank, 18.5mm Diameter, 65 Degree Angle, Tungsten Carbide Tipped, C119X1/4TC
ACCURATE SURFACE ALIGNMENT Trimmers ensure precise alignment and shaping of surfaces, particularly with laminate or veneer. They trim flush once affixed to the workpiece. Some models have side-fences, while most are self-guided.
Check price
sourcing map Chamfer Router Bit 45 Degree 1/2" Shank 1-3/7" Cutting Height Edge Forming Router Bit for Woodworking
Suggested feed rate 8-12m min, suggested spindle speed 18000-24000RPM. The larger the tool diameter, the smaller the spindle speed should be.
Check price
Trend 12 Piece Router Cutter Starter Set, 1/4 Inch Shank, Tungsten Carbide Tipped, Storage Case Included, SET/SS8X1/4TC, packaging may vary
VERSATILE CUTTER SELECTION This 12-piece router bit cutter set offers popular TCT bits for decorative and constructional woodworking, from fine furniture to small joinery.
Check price
KATUR 45 Degree Chamfer and Bevel Edging Router Bit, Carbide Tipped Chamfer Router Bit with 1/4 Inch Shank, Woodworking Milling Cutter (1/4" Shank 45 Degree)
Chamfer and Bevel Edging Router Bit 1 4" shank; 1.5" width; 0.69" depth; 45 degree
free shipping
Check price
sourcing map Chamfer Router Bit 1/4 Shank 3/8" Dia 45 Degree High Carbon Steel with Bearing for Carpentry Woodworking Cutter Tool
Shank Diameter 6.3mm; Cutting Angle 45 Degree
Check price
Chamfer Router Bits 1/4-inch Shank with 45 Degree 7/8 inch Cutting Length, Edge Forming Cutter Tungsten Carbide Tip for Woodworking
High quality material Made of tungsten carbide,Professional grade drill bit router.
Check price
sourcing map Chamfer Router Bit 45 Degree 1/4" Shank 2/3" Cutting Height Edge Forming Router Bit for Woodworking, 2.26" (57.5mm) Length
Suggested feed rate 8-12m min, suggested spindle speed 18000-24000RPM. The larger the tool diameter, the smaller the spindle speed should be.
Check price
Yueqing Zhongji 45 Degree Chamfer Router Bit Set, 1/4 Inch Shank-6.35MM Shank Cutting Diameter in 1/2”, 5/8”, 11/32”, 25/64” C3 Carbide. Ideal for Angled Edges, Clean Edge or Decorative Pieces
Universal 1 4" tool holder Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Check price
Trend CraftPro Chamfer Router Cutter Bit, 1/4 Inch Shank, 30.9mm Cut Diameter & 67.5 Degree V Groove, Tungsten Carbide Tipped, C138BX1/4TC
PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
free shipping
Check price
Bestgle 4pcs 1/4 Inch Shank Chamfer Router Bits with 45 Degree , Industrial Grade Edge Forming Bevel Woodworking Cutter Tool, Cutting Length 3/8" 5/16" 1/4" 1/2"
Solid Hardened Steel Bodies with Anti-Kickback Design, Build-up & Heat Resistant Teflon Coating.
Check price
Yonico 13918 60 Degree Bevel Edge Forming Router Bit 1/2-Inch Shank
Silver induction brazing for maximum strength and durability
free shipping
Check price
Trend CraftPro Chamfer Router Cutter Bit, 1/4 Inch Shank, 19.1mm Cut Diameter & 45 Degree V Groove, Tungsten Carbide Tipped, C044AX1/4TC
PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
Check price
SpeTool Chamfer Router Bits 1/4 inch shank 45 Degree Edge Forming Router Bit with Bearing Self Guided Treatment 2 Flutes CNC Bit Cutter Woodworking Tool for Wood
Size The Chamfer Router Bit has a shank diameter of 1 4'', an angle of 45 degrees, and an cutting length of 7 16''. The exceptional concentricity of the Chamfer Bit, combined with the sophisticated anti-kickback design, ensures vibration-free and highly stable usage.
Check price