METALLIXITY Bi-Metal Hole Saw Kit 55mm (2-11/64"), M42 High Speed Steel Hole Cutter with Center Drill Bit, Hex Key and Spring - for Metal Sheet, Wood, Plastic Plate and PVC Board. Blue
Product description
- 1 APPLY TO - M42 High Speed Steel material hole opener contains 8% cobalt, suitable for metal sheet, wood, copper, aluminum, iron, plastic, gypsum board, pvc board; triangular shank design is non-slip and stable when working, suitable for electric drills and cordless drills; a large number of applications in plumbing, electrical engineering and a variety of drilling work.
- 2 SPECIFICATION - Hole Saw Diameter 55mm (2-11 64"), Height 37mm (1.46"), Shank Diameter 9.5mm (0.37"), Total Length 104mm (4.09") with Triangular Shank, with 1Pcs Center Drill Bit Diameter 6mm (0.24"), with 1Pcs Hex Key.
- 3 DESIGN - Surface Hardening Treatment (Nitriding + Paint Coating) - Provides the surface of the opener with high hardness and wear resistance while maintaining sufficient toughness on the inside. Smooth and rust prevention.
- 4 ADVANTAGES - Our Bi-Metal Hole Saw are heat-treated (Quenched + Tempered) - to increase the hardness, strength and wear resistance of the Bi-Metal Hole Saw, thus extending their service life and improving machining efficiency.
- 5 EXPAIN - Need to rotate the Center Drill to make it fixed, use the hex key to align the locking pin with the hole of the groove of the Center Drill, tighten and fix it on the tool could be used, at the same time, you need to pay attention to the installation of the spring. Pay attention to keep the vertical state.
You might also be interested in these hole saws 55mm.
55mm Hole Saw, HSS Bi-Metal Hole Cutter with Drill Bit for Wood, Plastic, PVC, Fiberglass and Plasterboard, Yellow
EXCELLENT WORKMANSHIP This powerful hole cutter is made of M42 high-speed steel and bi-metal, with higher hardness ( 65HRC), higher toughness, higher cutting strength, and stronger wear resistance. Also, Built rust-proof for repeat use. It s cutting depth is 38mm.
Check price
Hole Saw 55 mm, Bi-Metal Cutting Depth HSS M 42 Hole Cutter for Cutting Wood, Plastic, Drywall, Plasterboard and Soft Metal Sheet
Easy to Use Non-binding clean edge design makes cuttings smooth and fast. More than that, the spring on the drill will automatically pushes the disc out of the saw immediately after completing the hole cutting
Check price
55mm Hole Saw Bi-Metal With Arbor And Pilot Drill For Drilling/Cutting Wood, Plastic, Metal Sheet, Stainless Steel, Pipes, Drywall, Circular Holesaw Set M35 5% Cobalt Bi Metal Hole Cutter
This hole saw drill bit gives a fast clean cut. 38mm depth of cut - you can drill 38mm deep with this hole saw.
Check price
HSAWBIT HSS Bi-Metal 55mm Hole Saw, M42 Fast Cut Extra Cobalt Hole Cutter 40mm Cutting Depth, For Stainless Mild Sheet Wood Plastic Various Materials
Package 1 * 55mm hole saw, 1 * Hex arbor, 1 * Allen wrench
Check price
55mm Hole Saw for Wood, HSS Bi-Metal Hole Cutter for Pipe Vent, Separate Drill Bit with Hex Shank, ideal for Cutting Plasterboard, Timber, Perspex and Plastic
FAST & ACCURATE The increased hardness of the carbide technology and optimized tooth geometry help our hole saw to provide faster cutting speed and more accurate than standard hole saws cutting everything from wood and plastics to aluminum, steel, cast iron, and stainless steel.
Check price
GARHWAL Bi-Metal Hole Saw 55 mm with Arbor and Pilot Bit - Smooth Fast Cutting for Wood, Plywood, Plastic, Drywall, Thin Metal Sheets, and More | Ideal for Ceiling Light Installation and DIY Projects
Added Convenience Features The Fast Cut Saw has several added features for user convenience. The kit includes a center drill bit, hexagonal wrench, and ejects saw plugs for easy removal. It has an anti-corrosion coating for excellent resistance to wear and impact. The user-friendly design offers improved stability, good toughness, a non-slip shank, and anti-skid features.
Check price
SALI TCT Carbide Hole Saw for Hard Metal,55mm，2-1/6" Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Aluminium, Plastics
Cutting Diameter 55mm 2-1 6 "
Check price
Eclipse Professional Tools EBV30-55 PLUS 30 Bimetal High-Speed Steel Hole Saw 55mm diameter
55 mm diameter
free shipping
Check price
Saxton HSS Hole Saw Cutter M42 Bi-Metal 8% Cobalt Heavy Duty (14mm – 230mm) (55mm)
HIGH PERFORMANCE MATERIAL Compared to conventional hole saws, the HSS, M42 Bi-Metal + 8% cobalt saw offers superior cutting performance due to its higher cutting hardness and toughness, wear resistance, impact resistance, and faster cutting speed - 38mm cutting depth
Check price
Eclipse Professional Tools - EBVP-55-55mm Predator HSS Bimetal Holesaw, Exceptional Cutting Performance on Steel, Cast Iron, Brass, Bronze, Aluminium, Plastic and Woods, Arbor Not Supplied
Variable Pitch, 4-6 tpi for all purpose applications with a fast and accurate cut
free shipping
Check price
Saxton HSS Hole Saw Cutter M42 Bi-Metal 8% Cobalt Heavy Duty + Arbor (14mm – 230mm) (55mm + Arbor)
HIGH PERFORMANCE MATERIAL Compared to conventional hole saws, the HSS, M42 Bi-Metal + 8% cobalt saw offers superior cutting performance due to its higher cutting hardness and toughness, wear resistance, impact resistance, and faster cutting speed - 38mm cutting depth
Check price
55mm Hole Saw, HSS Bi-Metal Hole Cutter with Drill Bit, Heavy Duty Hole Saw for Wood, Plastic, Drywall, Fiberglass, Yellow
Premium Material Our 55mm hole saw is made of high-speed steel and bi-metal, which is durable and rust-proof. The slug holes around the saw are able to remove the wood chips while cutting, reduce friction heat and improve efficiency
Check price
55mm Hole Saw LAIWEI Hole Cutter,For Drilling Wood, Aluminum Profiles,PVC and Other Materials(2-5/32"(55mm))…
Size The 55mm hole saw(2-1 6 inch Hole Cutter) has a total length of 83mm and a cutting diameter of 55mm (2.2 inch hole saw). The thickness of the saw blade is 1.2mm, the diameter of the shaft is 10mm, and the diameter of the center drill is 6mm.
free shipping
Check price
Carbide Hole Cutter Drill Bits,LAIWEI Heavy Duty Hole Saw for Stainless Steel,Metal,Cast Iron, Copper 2-1/6"(55mm)
Under normal conditions, the service life of the Laiwai metal punching machine is longer than other drilling tools. Ideal for processing stainless steel sheet, sectional steel, cast iron, aluminium alloy, copper, steel sheet, iron sheet, aluminium sheet, wood and other materials.
Check price
Hole Cutter 55mm LAIWEI Bi-Metal Hole Saw 2.2inch,HSS Circular Hole Saw Head,1.8mm Thick,Cutting Depth up to 38mm,Suitable for Wood,Plastic,plasterboard and Metal Pipes
LAIWEI Hole Saw Can be used to drill holes in materials such as metal pipes, wood, plastic sheets, PVC sheets and plasterboard. The drill and hole saw remain stable during use, preventing excessive wobbling due to damage to the drill bit.
Check price
Hole Saw 55mm, Hole Saw with Drill Bit for Wood, Orange Bi-Metal Hole Cutter Smooth Cutting for Soft Metal, Drywall and Plastic
Cutting Depth Enjoy deeper cuts with a cutting depth of about 30mm, allowing you to tackle thicker materials with ease, ensuring efficiency and precision in your drilling tasks
Check price
BOSCH Bi-Metal Hole Saw (for Wood and Metals, 8% Cobalt Alloy, Progressive Tooth Design, Ø 54 mm, Accessory Drills)
Robust quality The use of Bosch bi-metal with 8 % cobalt alloy ensures twice the service life of the previous model
Check price
Hole Saw Set, 13Pcs 18mm - 75mm Hole Saws Drill Bit with Hex Shank and Centring Drill, Hole Cutter Drilling Holesaw Kit for Wood Soft Metal Plastic Plasterboard
13 Size Hole Saws You will get 13 different sizes of hole saws, each with a hex adapter and a centring drill. The hole diameters include 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35 mm, 38mm, 45mm, 50mm, 55mm, 65mm, 75mm. Also comes with two hex wrenches.
Check price
55mm Hole Saw with Quick Change Arbor, Hole Drilling Cutter HSS BI-Metal for Wood, Plywood, PVC, Drywall and Metal Sheet
Material The hole saw is made of BI-metal that is sturdy and tough.
Check price
KATUR TCT Carbide Hole Saw Drill Bit 55mm, Tungsten Carbide Tipped Hole Cutter, Heavy Duty Industrial Grade Hole Cutter for Stainless Steel, Metal, Iron, Alloy, Copper, Wood, Plastics
High Quality Material Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable
Check price