SLZB-MR2 Zigbee 3.0 to Ethernet, USB and WiFi Adapter with PoE, Works with Zigbee2MQTT, Home Assistant, ZHA (SLZB-MR2)

compatible with home assistant zigbee2mqtt and zha

compatible with home assistant zigbee2mqtt and zha

1.SLZB-06 NoPOE is a Zigbee to Ethernet USB WiFi adapter with POE support, comes pre-flashed and ready to use. Can be used as a Zigbee 3.0 gateway in the open source automation platforms Zigbee2MQTT, Home Assistant, ZHA.

- Works with Home Assistant - Works with Zigbee2MQTT - Works with ZHA - Supports Matter-over-Thread - Uses CC2674P10 chip

1.SLZB-06M is a Zigbee to Ethernet USB WiFi adapter with POE support, comes pre-flashed and ready to use. Can be used as a Zigbee 3.0 gateway in the open source automation platforms Zigbee2MQTT, Home Assistant, ZHA.

- Works with Home Assistant - Works with Zigbee2MQTT - Works with ZHA - Higher RAM to handle larger zigbee networks - Uses CC2652P7 chip

- Works with Home Assistant - Works with Zigbee2MQTT - Works with ZHA - Supports Matter-over-Thread - Uses CC2652P chip

1.SLZB-06P10 is a Zigbee to Ethernet USB WiFi adapter with POE support, comes pre-flashed and ready to use. Can be used as a Zigbee 3.0 gateway in the open source automation platforms Zigbee2MQTT, Home Assistant, ZHA.

Works with Home Assistant, Zigbee2MQTT, and ZHA for broad smart home compatibility Supports Matter-over-Thread for future-ready smart home integration Based on the powerful EFR32MG24 chip with Cortex M4F 48MHz, 88kB RAM, +20dB amplifier, and 5dB antenna Operates in LAN, USB, or Wi-Fi modes flexible connectivity for any setup Pre-flashed and ready to use with Zigbee2MQTT, no additional configuration needed Powered via PoE or micro-USB (USB-C adapter included for convenience) Secure web interface with password protection, internal firewall, and VPN tunneling support Compact design (106 22 24mm) with multilingual interface and LED control

1.SLZB-MR1 A multi-radio, dual-antenna Zigbee and Thread coordinator based on the CC2652P7 and EFR32MG21 modules.It integrates Zigbee and Thread in a single device.Can be used as a Zigbee 3.0 gateway in the open source automation platforms Zigbee2MQTT, Home Assistant, ZHA.

Powerful Features SLZB-06 can be used as a Zigbee coordinator Router Signal extender(+20dB amplifier&+5dB antenna,Having a wider signal coverage range)

- Works with Home Assistant - Works with Zigbee2MQTT - Works with ZHA - Supports Matter-over-Thread - Uses EFR32MG21 chip

Dual-protocol support Use Zigbee and Thread (Matter) simultaneously via the powerful EFR32MG24 chip Triple connectivity options LAN, USB, and Wi-Fi modes for flexible installation Pre-flashed and ready to go Seamlessly works with Home Assistant, Zigbee2MQTT, and ZHA Power-over-Ethernet or USB Includes micro-USB to USB-C adapter for wide compatibility Secure and scalable Built-in VPN tunnelling, firewall, and multi-coordinator support for large smart home networks

With POE

1.SLZB-06p7 is a Zigbee to Ethernet USB WiFi adapter with POE support, which is pre-installed and ready to use. Can be used as a Zigbee 3.0 gateway in open source automation platforms Zigbee2MQTT, Home Assistant, ZHA.

Powerful Features Can be used as a Zigbee coordinator Router Signal extender(+20dB amplifier&+5dB antenna,Having a wider signal coverage range)

Compatible with Nintendo Switch enjoy gaming with your friends and fast downloads by plugging into your Nintendo switch dock and adding a gigabit Ethernet connection

- Works with Home Assistant - Works with Zigbee2MQTT - Works with ZHA - Supports Matter-over-Thread - Uses CC2652P7 chip

Work as Coordinator or Router Coordinator or Router Zigbee firmware.

Powerful Chips Based on CC2652P Zigbee chip with Cortex M4F 48Mhz, 88kB RAM; Most powerful version of ESP32 chip inside 2 cores @ 240Mhz + 16Mb memory;Zigbee and Core firmware OTA update over web-interface (one-click update).