sourcing map 10pcs 6 Awg 90° Bent Copper Lugs Battery Cable Ends, 6 Gauge 5/16" Stud Battery Lugs Ring Terminal Connector with 10pcs 3:1 Black & Red Heat Shrink Tubing

Show on Amazon

Offer

Price trend

Product description

  • 1.Crimp Tightly Use a crimping tool to compress the lug barrel securely onto the wire.2.Seal with Tubing Slide the heat shrink tube over the connection and apply heat (e.g., heat gun) until fully sealed.
  • This Copper Cable Lug is made of copper and is installed using crimp method. It has a wiring specification of 6 Awg, with a terminal hole diameter of 5 16 inches and a head inner diameter of 5.9mm 0.23 inch. The total size is 22x14x8.5mm 0.87x0.55x0.33 inch and comes with 10 wire lugs including 10 3 1 heat shrink tubes (5 black + 5 red). The 3 1 heat shrink tubing size is 12.7mmx45mm 0.5x1.77 inch
  • 90-degree bent copper lugs are made of pure copper to resist high temperatures and corrosion, ensuring minimal resistance and maximum power transfer. The 90 design fits snugly on battery posts and bolts, and can be connected by crimping and welding, ensuring electrical components, batteries, and cables are safe. 3 1 adhesive heat shrink tubing seals the connection and has excellent insulation properties, protecting the connection from heat, dust, moisture, and corrosion.
  • Ensure the lug s AWG rating matches your wire gauge for a safe, snug fit.

You might also be interested in these 90 degree batteries terminal.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.