POENVFPO PWM Fan HUB DC 12V with 8 -way Fan Doors, Adjustable Speed Control, Suitable for 4 -Ming 4 PIN 3 to 3 PIN

Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.

Excellent 4-pin PWM 1 to 3 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.

Excellent 4 pin PWM fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.

This hub can also be compatible with 3-pin fans, due to 3 pins no PWM controller, 3-pin fans will run in full speed.

High performance cable management The product is not only a hub for ARGB lighting signals, but also a hub for PWM fans, supporting the installation of 8 ARGB fans and 8 PWM fans at the same time, with 4 lighting connectors and fan power connectors on each side, one plug can be used to keep the ARGB fan lighting and PWM fan cables tidy (Note 12V 4PIN RGB interface devices are not supported and cannot be plugged in)

PWM fan splitter allows you connect 5 PWM devices on a single motherboard

Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.

ARGB & PWM 2 in 1 Fan Hub PCCOOLER Each port of the fan hub splitter has its own PWM function that simultaneously adjusts the fan speed, allowing users to optimize the cooling capacity within the extended computer case. Support ARGB fans, ARGB light bars, etc., and synchronize the light effect of 5V 3Pin interface devices. (Note +12V 4Pin RGB interface devices are not supported! Do not plug in!)

Ideal for CPU Fans with TX3 Connectors

SVRITE

ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).This CPU Cooling IDE Hub is powered by IDE 4PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.

This chassis fan hub is mainly applied to 12V computer case cooling fans. The port splitter can be adjusted manually, starting the fan at full speed (HIGH) or low speed (LOW), and also shutting it down (OFF).

The Game Max a RGB hub allows you to connect to six fans and allows the user to expand their cooling capabilities within your gaming PC, ultimately increasing the performance

Precise PWM fan control Take advantage of automatic fan speed adjustment with the hub's PWM function, and use the red CPU interface for CPU fans with speed detection.

Flexible connections The 300 mm extension cable provides greater flexibility in the positioning of fans for optimized cooling.

Note the fan base supports 3 pin and 4pin fans, If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current conneted to the fan shall not exceed the maximum current value of 17A.

Multiple connection design the 2-in-1 ARGB PWM fan hub with controller has 9 x 5V 3-poly ARGB ports and 9 x 4-pin PWM fan ports, which significantly increases capacity. The fan hub supports up to 9 fans, including 9 x 4-pin temperature-controlled ports and 9 ARGB ports, and is ideal for ARGB devices and ARGB fans.

Fan Hub 4 pin compatible with all 12V CPU and case fans with 4 pin or 3 pin connector.

Complete Kit Included Remote, SATA cable, PWM ARGB cables, and sync cable for plug-and-play setup.

Designed for the need to control numerous system fans.