PENCHEAK Computer Chassis Fan Speed Controller PCI Bit 8 Way Cooling Fan Speed Controller Can Be Shut Down Aluminum 4Pin

No stop mode prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors

Size 133*48*14.3mm(5.24*1.89*0.56in).

Wireless Remote Control Wireless remote control switch can freely switch between host mode and remote control mode, and easily adjust fan speed (S M H) lighting effect brightness LED speed with one button without opening the case.

8-way fan splitter board for powering, controlling and monitoring multiple fans, transmits PWM signal from PC motherboards or optional NA-FC1 fan controller to all connected fans

EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header. Note Max current limit is 3A in total, check the spec of fan first.

Space Saving The 12V RGB hub saves you space, makes cable management easier and keeps the interior of the case tidy. The adhesive on the back can be used to secure the hub inside the chassis for a tool-less installation that won't fall off easily.SATA Power Supply It maintains a stable output even when fully loaded.

Easy to install PC 3 Channels Fan Hub The governoris installed in the PCI position of the chassis, which can be more convenient for your adjustment, use and installation.

Optimized for Performance & Safety Engineered with tin-plated copper wire and a PVC insulating layer, our fan power adapter cable ensures strong conductivity and resistance to corrosion and oxidation, extending the lifespan of your setup. Fan header splitteris designed to distribute power evenly among up to five fans without exceeding the motherboard s power limit, promoting safe operation and preventing overheating.

Easy to install Double-sided adhesive for easy installation and more stable standing in the surface.

Supports 12V RGB 5V ARGB motherboard synchronization by switching a small switch to synchronize two lighting systems, compatible with AURA, RGB Fusion, Mystic Light and Polychrome. There is no built-in color mode, and the sync cable must be connected to the motherboard head.

Please note The governor has a power limit, a single port can support a maximum current of 0.7A, it cannot be used beyond the standard, and a single fan with a power exceeding 10W cannot be connected, otherwise the product will be easily damaged

Size 133*48*14.3mm(5.24*1.89*0.56in).

GINTOOYUN 5V 3-pin ARGB conversion cable can convert the Corsair 4-pin plug into a universal 5V 3-pin ARGB plug for wiring the Corsair controller.

Input USB 5 V, Output DC 5-12 V adjustable,Max output 8W,ideal for Low-power 12 V fan speed controlling.

Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case.

Small size suitable for all types of computer cases, magnetic design, easy to install, takes up little space, external knob, more convenient speed adjustment

Output is standard PWM 4pin fan port, Fan speed adjustment range 0-100%, Turn the knob clockwise to increase the speed, Turn the knob counterclockwise to reduce the speed, Turn counterclockwise to close the output.

6 Adjustable Channels - Designed to accommodate six 20W fans with speed control down to Zero RPM.

MULTIPLE EFFECT SELECTION The controller has more than 5 pre-configured and adjustable lighting modes. This allows the system lighting to be customised to individual tastes