Gebildet Dash Cam Hardwire Kit, Car Dash Camera Mini Charger Hard Wire Kit for Dashcam DC 12-24V to 5V/2.5A Low Voltage Protection 24h Parking Surveillance with Fuse Tap

Product description

• Dash Cam Hardwire Kit This dash camera hard wire power hardware kit is compatible for most onboard dash cameras, GPS, radar, and dash cams on the market
• 24 7 Non-Stop Surveillance The dashcam hardwire cable can connect to the car fuse box to power the onboard dash cam and keep it 24hrs surveillance; Also the dash cam hard wire kit will cut off the power supply when the car battery drops to 11.6V or 23.5V to prevent the battery drain out
• ACC Turn On Mode If you don't want the dash cam to record 24 7, you can install this dash cam hardwire kit in the ACC+ fuse slot to operate the ACC turn-on mode, which the dashcam will only be powered when the car turns on (RECOMMEND this Mode when you need to park the car for over a week or a longer time)
• Clean and Space Saving By using this dash cam hardwire kit you can easily hide the wire and cable to make your carpet look cableless and clean; also this dash cam charger doesn't occupy your car's cigarette lighter port and allow you can use the port to charge other devices in your car
• Installation Note It is always recommended to ask for professional assistance when you are not sure how to hardwire the kit with the dashcam, the installation will require some basic electric and wiring knowledge about your vehicle.