Deal4GO Headset Cooling Fan BAPA0505R3H Y003 Replacement for Meta Oculus Quest 3 3S VR Mixed Reality Headset
Show on Amazon
Show on Amazon
Offer
£ 22.55
£ 5.72 | 1-2 Days
go to shop
Price trend
Product description
- Compatible with Meta Oculus Quest 3 and Quest 3S VR Mixed Reality Headset series, NOT FIT for Quest 2 1 series.
- Direct Current DC 3.3V 0.5A; Power Connection 4-Pin 4-Wires Wire-to-board
- If your VR Headset Fan is running very loud or not functioning then a replacement may be needed.
- Each Pack come with 1x CPU Cooling Fan, 1x Thermal Grease.
You might also be interested in these quest 3 cooling fans.
AriKroii Cooling Fan Face Pad for Meta Quest 3, with Silicone Nose Pad, Active Air Circulation Ventilation to Anti Fog and Anti Leakage Light Mask, Replacement Mask VR Accessories for Quest 3 (Black)
Dual fan system the cooling fan adopts a new dual fan system, and when the air conduction and ventilation structure of the mask is extended, the wind is redirected and the cool air wraps around the entire mask to prevent fogging during intense play. At the same time, the noise-dampened fan ensures that you don't have to worry about noise interference.
free shipping
Check price
Vr Cooling Fan for Oculus Quest 2, 3 Speeds Anti Fogging Cooling Air Circulation Fan with Soft Pu Foma Facial Interface Pad and Light Proof Nose Pad Fan Cooler for Quest 2
COOLING FAN SYSTEM, PREVENT FOGGING VR fan sucks the heat outside to accelerate gas circulation so get your face cooler and less sweat, and stop the lens and glasses from fogging, provides you with better gaming immersion and need not take off the headset frequently like before.
Check price
Cooling Fan for 2, Cooling Fan for VR, Gas Circulation Fan 3 Speeds Heat Dissipation Prevent Fogging Soft Pad Cooling Fan for 2 VR
VBESTLIFE
free shipping
Check price
ID-COOLING AS-120-K TRIO 120mm Black Computer Case Fans 3 Pack High Performance Cooling Fans Low Noise 27.2 dB(A), Fan Speeds from 300 RPM - 2,000 RPM, 58 CFM, Hydraulic Bearing Quiet Long lifespan
Powerful Fan Controlled fan speeds from 300 RPM up to 2,000 RPM, pushing up to 58 CFM of air with 1.94mm-H2O of static pressure.
Check price
SABRENT Hard Drive Docking Station, 4 Bay SSD Dock, SATA Multiport Hard Drive Enclosure, Offline Cloning, Cooling Fan, 2.5” Universal Compatibility (DS-4SSD)
EASY PLUG & PLAY This hard drive enclosure 4X 2.5 plugs in without tools when installing. the magnetic structure was used to complete the installation in just 3 seconds. The fan on the back of the product ensures good heat dissipation. In addition, the blue indicator light provides an overview of the operating status
free shipping
Check price
StarTech.com 4-Bay Mobile Rack Backplane - Trayless Hot Swap Mobile Rack Backplane for 3.5in SAS II/SATA III - 6 Gbps HDD (HSB4SATSASBA)
INCREASED PRODUCTIVITY The mobile rack backplane for 3.5in SAS II SATA III turns three 5.25in bays into a hot-swappable interface for up to four 3.5 SATA or SAS hard drives (HDD)
free shipping
Check price
SilverStone SST-GD06B - Grandia HTPC Micro ATX Computer Case, Silent High Airflow Performance, 2x 3.5 Inch Hot Swap Drive Bay, lockable, black
support 4 x 3.5 hard drives and 2.5 hard drive or ssd (solid-state drive)
free shipping
Check price
ExpressCage MB324SP-B 4 Bay 2.5" SAS/SATA HDD & SSD Hot Swap Cage for External 5.25" Bay - Comparable to Tray-Less Design
Supports up to 4 x 2.5" SATA SAS HDD SSD into a single 5.25" bay
free shipping
Check price
SABRENT 4 bay hard drive docking station, SSD HDD 2.5 3.5 inch SATA case dock, external SSD enclosure + power adapter, offline cloning, LED indicator, tool-free, USB cables included (DS-U3B4)
BUY WITH CONFIDENCE If you encounter any problems during use, please contact us in advance. We will give you a satisfactory answer as soon as possible. Register your product at Sabrent.com, contact our friendly customer service [email protected]
free shipping
Check price
KKCOBVR K3 Facial Interface Fan with Leather Face Pad Compatible with Meta Quest3, Relieve Lens Fogging and Fits Use with Quest 3 Head Strap
BUILT-IN DEFOGGING FAN There are four air inlets designed to enhance air inflow, and the flow of wind blowing can be defogged for your vr lens.The width is the same as the official facial interface.
Check price
TERRAMASTER D2-310 USB Type C External Hard Drive RAID Enclosure USB3.1 (Gen1, 5Gbps) 2-Bay RAID Storage Support RAID 0/1/Single (Diskless)
Up to 32TB storage capacity It is Compatible with 3.5" and 2.5" SATA HDD; 2.5" SATA SSD. Maximum Single Volume Size 16TB.
free shipping
Check price
StarTech.com 5.25in Trayless Hot Swap Mobile Rack for 3.5in Hard Drive - Internal SATA Backplane Enclosure - Lockable drive bay (HSB100SATBK)
50,000+ insertion rating
free shipping
Check price
StarTech.com 2.5" to 3.5" SATA Hard Drive Mounting Bracket Kit - Dual SATA SSDs/HDDs Mounting Bracket for Mounting Bay (BRACKET25X2)
CONVENIENT SETUP Use this dual 2.5in HDD SDD mounting bracket to install two 2.5 inch SSDs (solid-state drives) or HDDs (hard drives) into a 3.5 inch drive bay on your desktop PC
Check price
AriKroii Cooling Fan Face Pad for Meta Quest 3, with Silicone Nose Pad, Active Air Circulation Ventilation to Anti Fog and Anti Leakage Light Mask, Replacement Mask VR Accessories for Quest 3 (White)
Dual fan system the cooling fan adopts a new dual fan system, and when the air conduction and ventilation structure of the mask is extended, the wind is redirected and the cool air wraps around the entire mask to prevent fogging during intense play. At the same time, the noise-dampened fan ensures that you don't have to worry about noise interference.
free shipping
Check price
Aukuoy Cooling Facial Interface Face Cover for Quest 3: Adjustable VR Facial Interface Bracket with cooling fan, Soft Breathable PU Face Pad and Lens Protector for Quest 3 Accessories Set
Added Cooling Fan The unique vent design of this mask holder with cooling fan can keep your face cool while gaming, no more sweat build-up, fogging or overheating problems, ensure breathable and no light leakage.
free shipping
Check price
Cooling Facial Interface Cover For META For Quest 3/3S, Adjustable VR Facial Interface Bracket With Cooling Fan, 7000 Rpm
ADJUSTABLE FIT Tailor the mask to your individual needs with adjustable height knobs, perfect for those who wear glasses and desire a secure fit.
free shipping
Check price
Getdoublerich For Quest 3/3S Cooling Fan Mask, Adjustable Head Display Radiator, Dual Fan Dual Mode Pulsator Adjustment Pressure Relief Quiet, Comfortable Design
ENHANCED COMFORT This mask is designed to significantly reduce facial pressure by increasing the force-bearing area by 95%, comfort during extended periods of use.
free shipping
Check price
Cooling Fan for Meta Quest 3S VR,Heat Dissipation Accessories Anti-fogging Accelerated Air Flow Adjustable Heat Fan
Made of high-end soft and comfortable PU leather.
free shipping
Check price
DESTEK Cooling Face Pad Facial Interface Compatible with Meta/Oculus Quest 3, Includes Two Replacement Ice Silk and Cool Ice Gel Face Cushions – Adjustable Bracket, NOT Compatible with Meta Quest 3S
Soft and Bouncy Comfort for Extended Play The DESTEK face pad for Quest 3 features ultra-light foam and bouncy cooling gel, providing a jello-like softness that gently molds to your face. So comfortable that you ll forget you re wearing it, allowing you to stay immersed in VR for hours. Please note This product is NOT!!! NOT!!! NOT!!! compatible with Quest 2 3S , not support official third-party charging docks.
free shipping
Check price
Cooling Fan with PU Leather Face Pad for Meta Quest 3S, Cooling Fan Heat Dissipation Accessories, Relieve Lens Fogging and Fits for Quest 3S Head Strap
5. Packing include 1 x cooling fan, 1 x PU leather face pad, 1 x charging cable, 1 x cleaning cloth
Check price