GX PUMP Professional-Grade High Pressure PCP Air Compressor Filter with Pressure Maintaining Function- 5800PSI Oil/Water Separator, Magnetic or Screw Mounting,Dry Air Intake Filter for Paintball

Product description

• Heavy-Duty Aluminum Construction Crafted from seamless aerospace-grade aluminum alloy with 10mm thickened walls (9.68mm actual), this industrial-strength filter withstands 5800 PSI pressure while featuring anti-slip texture for secure grip and scratch resistance.
• Ultra-Efficient Filtration System Dual-layer purification with activated carbon + molecular sieves removes 99% of oil, water, and microparticles (down to 0.01 m), delivering breathing-grade air output to protect your PCP rifles and diving equipment from moisture damage.
• Universal Compatibility M10 1 thread & 8mm quick-connect design works flawlessly with GX pumps (CS1 CS2 CS3 CS4-5K), and other brands 95%+ PCP compressors. No adapter needed!
• Pressure Maintaining Function It is our patent design. It initiates gas supply to the pcp tank only when the pressure reaches about 1800- 2000 psi. This feature enhances oil-water filtration efficiency. Pro Tip Always connect compressor hose to "INLET" port.
• Two Mounting Choices 1, Secure Magnetic Mounting The filter's side panel features three pre-drilled screw holes. Simply install two included industrial-strength magnets (screws provided) for ultra-stable adhesion to your compressor body. 2,Drilling and Screw Fastening The filter base is equipped with a hex screw that can be used to drill holes on surfaces with a thickness below 5mm for long-term secure fastening. Of course, you can also use it flat on your desktop.
• Notice When used with CS3-I or CS4-I models equipped with built-in converter, strong magnets may interfere with the power components. It is recommended to keep magnets clear of the built-in converter area. Refer to pictures which showing the area. For CS4-I, you can also attach to another compressor side without converter. For CS3-I, you can choose the bottom 2 magnet mounting holes.
• Dimension 260mmx50mm 10.23 1.97" Wall Thickness 9.68mm Outer Diameter 50mm 1.97'' Hose 21.65 inch, Application For PCP air compressor,scuba diving tank compressor. Package includes GX filter, hose, 5 replacement cottons for filter elegment, a spare filter element. It means you will get two filter elements ( one was installed) so that you can use long time.
• Notice Do not loosen the small nut at the top, which is a nut set before leaving the factory and is used to set the output pressure of the pressure-maintaining valve. In the future, you only need to remove the large nut with holes to replace the filter element or filter material.