Battery Disconnect Switch, 275A 12V 24V 48 V On-Off Top Post Battery Shut off Switch Disconnect Isolator for Car, Vehicle, RV and Boat

Safe Protection The battery cut off switch can cut off the power supply of the vehicle or the battery on board for safety purpose. If you do not use the battery for a long time, this can also save power.

Purpose eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely, widely used for car, vehicle, Rv and boat.

Compatible Spurtar battery disconnect switch is suitable for most top post terminal(15-17 mm cone battery negative post), use under the condition of 12V voltage, 125 A, knob type.

Wide Application Ideal for use in cars, trucks, RVs, boats, and other vehicles. This battery isolator switch also works well for other electrical equipment where battery disconnect safety is essential. It includes all necessary hardware and instructions for installation.

More Convenient Auto car kill switch anti-theft, with remote, convenient and fast, Solves big expensive problems with current draw. if you didn't want to go through the hassle of doing this manually, Installing it is perfect, it will always start when you need it to.

Remote Control - This car battery disconnect switch is a remote control design, and will come with two paired remote fobs for use.

Durable Material Battery cut-off switch made of ABS plastic housing with 4 sets of bolts which tinned copper studs (10mm) and nuts for ignition-protected, and easy to distinguish different sounds of gears even at night.

Manual and remote Control This disconnect switch can avoid car battery to run out due to long-term parking, line aging and forgetting to turn off the light. It can maximize the storage of car battery power, effectively protecting and extending lifespan.

Battery Disconnect Switch The battery cut off isolator switches used for battery to isolate and secure the electrical system, eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely.

Power-saving and Anti-theft The battery disconnect switch is essential for safety, preventing battery drain, ensuring security, and facilitating easier maintenance of a vehicle's electrical system, making it an essential component for vehicle operation and maintenance.

Safe & Protective Battery master disconnect switch certificated by CE, and 4 removable side plates, the rear cover insulates terminals against any short of the circuit. Please rest assured to choose as your RV battery switch disconnect ATV battery switch

Operation Used for DC 12-24 V systems, On Off 2 position, rated current 200A (12V ), Max. with standing current 500A (12V ).

Easy to Install The battery cut-off switch adopts a negative link method, which is simple to install and has more stable performance. Note Be sure to turn off the power before installation and perform an ignition test after installation. The switch size is 3.35"x2.36"x1.38", it is best to check and measure your car's battery compartment before ordering to see if there is enough space to install and close the hood properly!

Protect the battery - With this auto battery disconnector, you can prevent the car battery from draining due to prolonged parking, aging circuits and forgotten turning off the lights. It can effectively protect the car battery and extend the life of the car battery

The on-off disconnect switch is designed for use on a single 12-48 volt battery. It can prevent unknown devices from draining the battery and save you from having to recharge it on a regular basis.

Battery Disconnect Switch The battery isolator switch 12v is designed to isolate and secure the electrical system, eliminating power draw from the battery when the vehicle or boat is not in use. It safely disconnects the battery to prevent any unwanted power usage.

Smart Voltage Safet Kill Switch If the voltage is lower than 11.8V, the remote kill switch will automatically cut off the power supply after 120s to save electricity. if the voltage is higher than 13.2V, that is to say, the remote control will be disabled while driving to prevent power outages caused by accidentally touching the remote control switch while driving.

Working Specifications Battery isolation switch rated current 240A, rated voltage 12V, standby current consumption 3mA, shutdown threshold 11.8V 0.2V, instantaneous current 500A

Compatible used for top post terminal, 15-17 mm cone tapering battery NEGATIVE post only, DC 12V-24V system, 200A continuous and 600A momentary at DC 12V, on off 2 position.

Widely Used Suitable for most 12V cars, motorhomes, boats, ATV, UTV, trailers, trucks, motorcycles and other vehicles with displacement less than 4.0, please check whether the battery compartment of your car has enough space to install before ordering, the switch size is 8.5*6*3.5cm 3.3"*2.4"*1.3"