YELUFT 3.7V 5000mAh Lithium Polymer Rechargeable Battery with Integrated Protective Board and PH2.0 Plug Compatible with WisBlock Meshtastic, Raspberry Pi UPS (Reversed Polarity)

Show on Amazon

Offer

Product description

  • Widely Application With PH2.0 plug, these battery can be used for RAKwireless WisBlock Meshtastic Starter Kit, Raspberry Pi UPS board or other projects
  • Discharging The discharge current must not exceed 3A, and the battery must be discharged within the ambient temperature range of -10 60 . High current discharge will cause a sharp decrease in the battery cell capacity and cause overheating
  • Charging It is recommended to charge with a current of 2A, charging to 4.2V with constant current, converting to constant voltage charging when charging to 4.2V, and finally setting at 0.02C cut-off current of 100mA, at which time the battery is fully charged. Charging with currents and voltages higher than recommended may cause problems with the battery's charging, discharging, mechanical and safety performance, and may cause heat generation or fluid leakage
  • Storage When the battery is not used for a long time, it may be in a certain over-discharge state due to its self-discharge characteristics. To prevent over-discharge, the battery should be charged regularly to maintain its voltage between 3.7V and 3.9V; over-discharge will lead to loss of battery performance and battery function

You might also be interested in these 3 7 v batteries 5000mah.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.