White COB Led Strip Lights with RF Remote, 10m Dimmable Ultra Bright 3000K Warm White LED Strip, Adhesive Indoor LED Lights for Bedroom, Kitchen, Under Cabinet DIY Lighting, 1 Roll of 10m

Show on Amazon

Colour: 3000k Warm White

Offer

i

Price trend

Product description

  • Easy Installation & Widely Use Very Simple installation. Just connect the parts and install to where you want. Flexible COB light strip with strong adhesive tape makes it easy to stick on clean, dry surface, also you can install it with screws (included). These COB LED strip lights is ideal for high-end business clubs, kitchen counters, vanity mirrors, dressing tables, closets, display case, bookshelves, wine racks, stairs, living room and other places that need decoration.
  • Dimmable & Multifunctional Comes with RF Remote and controller(receiver), it has memory function. 3 timing functions (10min 30min 60min) can make the strip light to turn off at the set time. brightness increase decrease (6 levels) and 4-fixed brightness levels (10% 25% 50% 100%) 3 modes (jump, gradient, flicker). Note Before using the remote control, the insulation at the end must be removed.
  • Easy to DIY Flexible and cuttable COB light strip can be bent at any angle and thus adapt to your devices to a large extent. The cutting functions give you great flexibility to achieve the length and shape you want. The middle of the metal point on the strip light is a cutting mark (one cutting unit every 50mm 1.97 inches), and the cut strip light can also be reconnected, which is very convenient for DIY! The strip light is 8mm (0.32 inches) wide, allowing you to fit it into very tight places!
  • All in One Kit Includes 10m warm white cob strip, RF remote control, controller, UKCA Listed DC 24V 24W power supply, 2 pin 8mm COB LED connectors, 2 pin 8mm COB LED connector extension wire, mounting brackets. You don't need to spend extra time and money buying other accessories.
  • Tips The red & black wires at the end of the strip can be cut off if you don't need to connect more strips. The red & black wire at the end of the strip is convenient for you to connect the DC connector included in the package so that you can power at both ends when you add longer strips in the kit! The 24W power supply in the kit is just enough for the strip light in the kit use. You must replace it with a higher output 24V power supply if the total length of the strip light exceeds 10m.

You might also be interested in these led lights for acoustic wall panels.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.