Flush Bolt, ANSI Concealed Manual Flush Bolt, Brass, Satin Chrome US26D Finish, Fire Rated

Product description

• Flush bolts are fitted top and bottom in the leading edge of the inactive leaf of a pair of metal doors. When both leaves are closed the flush bolts cannot be seen. With the inactive leaf bolted and secure, the active leaf can be locked and both leaves become secure.
• Manufactured from brass with a satin chrome finish US26D. Also manufactured to ANSI standards ( American National Standards Institute) which means fixing positions do not vary and they can be pre-prepped for metal doors.
• Measurements Body Size, Faceplate 25.4mm wide x 171.4mm high (Meets ANSI A115). Strike plate size 23.8mm x 57.1mm. Guide size 25.4mm x 50.8mm. Rod length 305mm steel rod measured from centre of face to bolt end, retracted. Throw 19mm bolt throw, 38mm adjustable bolt head. 12.7mm shoot diameter. Face Flat face only for use on square edged doors. Fixings Supplied with rod, guide bracket, strike plate and 8 x FH combo screws.
• Testing Fire tested Is assessed for use on uninsulated steel-based doorsets for up to 240 minutes to BS EN 1634-1 2014, regardless of exposure direction. Also successfully tested to EN 12051 1999. Classification 33-0132. Exova Warrington Report WIL 355513. Corrosion tested Successfully tested to Grade 4 (240 hours neutral salt spray exposure) in accordance with BS EN 1670 2007 Building Hardware Corrosion Resistance. Report No WIL 392103 refers.