INNOVAYOU Thread Lock Red, High Strength Lock Tight Thread Lock Anti-Rust&Loosening, Locktight Threadlock for Gap Filling and Tighten Bolts Nuts Fasteners 50ml Square Bottle

Show on Amazon

Offer

Price trend

Product description

  • Half-Bottle Package The blue threadlocker in the anaerobic adhesive is a single-component adhesive. Blue locktight will remain liquid when exposed to air. If it is lacking air, threadlocker blue will solidify. Therefore, the product is sold in the form of half a bottle (50ml)
  • Use steps 1. Keep the surface clean; 2Add enough thread locker to the end of the screw, 3. After application, the nut needs to be tightened to the locktite position within 3 minutes, wait for 20 minutes for initial curing and 24 hours for complete curing. Note 1. Do not mix with metal, oil and dirt
  • High strength thread lock red, for locking and sealing of threads below M20, threads above Dn65 need to be coated on both sides to isolate the air, otherwise the lock tight may not cure

You might also be interested in these locks tight thread locks.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.