RIIEYOCA USB 3.0 Header Splitter Extension Cable, 19-Pin/20-Pin 1 Female to 2 Male Splitter Internal DIY Cable.(15cm/5.8 in)

Connector 1 Double USB 3.0 19 20 pin male; Connector 2 USB 3.0 19 20 pin female;Length 5.9-inch(15cm)(approx)

You can use USB 3.0 type-A female convert USB3.0 (20pin Header) directly connected to the motherboard

USB 3.0 header extension cable for motherboards. 1 to 2 Y Splitter design. Connector 1 Double USB 3.0 19 20 pin male; Connector 2 USB 3.0 19 20 pin female. This cable is a great option for SLI configurations that need access to USB 3.0 headers

The USB 3.0 header extension cable suitable for the motherboard can expand the USB3.0 IDC 19 20 pin header on the motherboard to two headers to facilitate the connection of more USB3.0 devices.

The USB 3.0 Motherboard Splitter turns the single USB 3.0 slot on the motherboard into two ports, plus an adapter to use the front USB C port on the case.

MEIRIYFA Motherboard USB3.0 19PIN Splitter 1 to 2 extension cable can extend one USB 3.0 19P that was originally included on the motherboard to a one to two extension. Two USB 3.0 devices can be connected simultaneously.

About Usb Header Splitter the 9pin splitter to double 9pin adapter,can extend your motherbord 9pin connector to 2*9pin connectors,this adapter as an usb 2.0 motherboard splitter can connect more devices,can solves the problem of insufficient usb 9-pin sockets on the motherboard.

Used this splitter to connect two front panels to motherboard, Both worked independently, Easily solved the problem of connecting multiple USB 3.0 devices with only one connector available.

Expend Pin Connector The Extension Cable is designed for SLI configurations that require a USB 3.0 connector, the extension cable expands the USB 3.0 IDC 19 20 pin connector on the motherboard into two connectors for connecting more USB 3.0 devices.(Do not work with for Cor.iCUE 7000X)

Application USB can be applied to a variety of USB devices, such as card readers, hard drives, USB hubs, smartphones, and more.

Dneudct

USB 3.0 Female to 20 Pin Female Dual Port Splitter Cable allows you to split a USB 3.0 header on your motherboard into two additional USB 3.0 ports. This cable provides a convenient way to expand your computer's USB capabilities and connect multiple USB 3.0 devices.

USB 3.0 port x 2 switch to USB 3.0 20 pin cablex 1

Type Connector 1 USB3.0 19 20 pin female; Connector 2 Double USB 3.0 19 20 pin male

*** Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket.

You can use USB 3.0 type-A female convert USB3.0 (20pin Header) directly connected to the motherboard.

Secure and reliable connection While our cable is designed to provide a secure connection to your motherboard, some models may experience slight looseness due to variations in USB 3.0 ports.

Upgraded Design the new model adopts a HUB board design with chips, which is stable and reliable. The wire material has been upgraded to standard USB 3.0 with shielded wire, and the quality is much better than other ordinary wires.

Designed to upgrade the motherboard, the USB 3.0 header extension cable extends the existing USB3.0 19 20 pin header, allowing the simultaneous connection of multiple USB3.0 devices. splitter facilitates efficient data management and device connectivity in a cluttered configuration.

Self-Stick 9 pin Motherboard USB Splitter for easy installation, automotive adhesive tape is attached on the back, can be directly fixed on the mainboard or chassis.