Magichome Shower Head Holder for 16-27MM Riser Rail, Adjustable Shower Holder Bracket with 2 Hooks, Universal Shower Holder Replacement
Show on Amazon
Show on Amazon
Offer
Offer ends in:
04Days
18hours
01Minute
36seconds
£ 4.49 | 1-2 Days
go to shop
Price trend
Product description
- Adjustable Design - This shower holder is suitable for an 16-27 mm diameter round pole, and you can adjust the height easily without any tools.
- High Quality Material - The shower head holder is made of high quality ABS material and plated with chrome, which is durable, rust-proof and long service life.
- Special Hook Design - This shower head holder is designed with 2 hooks. You can hang some small things, such as shower brush, hair band and razor, etc.
- Easy Installation - This shower head bracket is easily to install without tools, and it doesn't need to remove the bar from the wall.
You might also be interested in these riser rail showers head holder.
Joyoldelf 19-25MM Adjustable ABS Replacement Hand Shower Rail Head Slider Clamp Holder Bracket, Chrome Plated
Durable with Good Quality robust and durable, beautiful appearance, but it was made from high quality ABS material. It is chrome plated to extend the durability, and it has been tested over 20,000 times. Before you make a purchase, you need to measure whether the diameter of the sliding rod is between 19-25mm, as shown in the third picture. If not, we have another variant suitable for 16-19mm slide bar showerhead brackets, please distinguish them carefully.
Check price
Magichome Shower Head Holder for 16-27MM Riser Rail, Adjustable Shower Holder Bracket with 2 Hooks, Universal Shower Holder Replacement
Adjustable Design - This shower holder is suitable for an 16-27 mm diameter round pole, and you can adjust the height easily without any tools.
Check price
Triton Showers, Replacement Hand Shower Bracket, Shower Riser Rail Slider, Universal Fit, Chrome, 22mm
This shower riser rail slider will fit any new or existing 22mm riser rail, making it the perfect replacement hand shower bracket
Check price
KES Shower Head Holder Hand Shower Bracket Replacement for 18-25MM Slide Bar Adjustable Shower Rod Holder Chrome Plated, PB4-CH
360 Degree Rotation The shower head holder can rotate 360 degrees freely. To make it easier to adjust the spray angle, you can tighten or loosen the bracket screw according to the weight of your shower. Note Do not tighten the bracket screw too tight.
Check price
Shower Riser Rail Slider, Adjustable Shower Head Holder Replacement Universal Shower Bracket for 22-25MM Riser Rail 360° Rotation Shower Pole Holder(Chrome Plated)
Durable The universal shower head holder is made of high quality abs material, chrome-plated, well constructed, durable, the natural resin pad in the faucet increases the friction, prevents the shower head holder from slipping, and protect against daily scratches.
Check price
YEAUPE Shower Head Holder with 2 Hooks for 19-23mm Shower Hose and 16-28mm Slide Rod,No Drilling,Angle and Height Adjustable,360°Rotation,Universal Shower Riser Rail Replacement Bracket,Chrome Plated
Hook Design This shower holder is upgraded to a double hook design, which increases the convenience of hanging towels or shower brushes, making the bathroom more organized. Due to its lightweight and compact design, it is not limited to home use but is also used in gyms, swimming clubs and hotels.
Check price
Shower Head Holder, Joyoldelf 19-25 MM Detachable Shower Holder Bracket, Adjustable Chrome Plated Shower Head Holders Replacement for Shower Head
Strong Enough & Durable With simple look, but the shower holder is constructed by engineering grade ABS material, rugged and durable for supporting shower head. Shower holder bracket completes a good bright surface with chrome to extend the shelf life, and resist daily scratches and corrosion.
Check price
Hibbent Universal Adjustable Shower Holder with Hook - Fits 19-22mm Shower Heads & 18-25mm Rails, ABS Chrome Slider Clamp Bracket
Wider Compatibility & Adjustable Design This shower bracket accommodates most standard shower heads (19-22mm) and round shower rails (19-25mm). Its tool-free height adjustment allows effortless customization to suit your needs.
Check price
Shower Head Holder for 15mm-30mm Riser Rail, Adjustable Shower Rail Rod Clamp Holder Bracket, 360 Degree Rotation Sprayer Bracket, Fits Slide Bars Detachable Slider Clamp (Sliver)
Design The bracket is equipped with a built-in resin pad, which can increase friction, prevent the shower head bracket from sliding up and down, and prevent scratches and abrasions.
Check price
1PC Shower Head Holder Bathroom Adjustable Chrome Slider Handheld Shower Head Bracket Fasteners to Fit 25mm Riser Rail
Easy Installation Secure the inner rod with a rubber stopper at the front end to press against the shower rod. Tighten the pipe's nut by rotating it to secure the sliding sleeve onto the shower rod; it is also used to adjust the height of the shower rod
Check price
KES Shower Head Holder 16-19MM, Adjustable Shower Holder Bracket Replacement Riser Rail Polished Chrome, PB10S19-CH
Wide Application KES shower head holder fits round shower riser rail of 16-19MM O.D. You can adjust the size of the shower holder bracket to clamp it to the rail flexibly through the rotatable switch at the end position. Note Do not tighten the rotatable switch too tight, and do not tighten it with a spanner.
Check price
OFFO Shower Head Holder, Adjustable 18-25mm Diameter Hand Shower Holder Bracket for Slide Bar,Detachable Slider Clamp Bathroom Replacement, 45 Degree Rotation Sprayer Holder,Chrome
Easy to Install No need to dis-assemble the shower slide bar, just adjust the knob at a suitable size, then it can be installed on the shower slide bar directly.
Check price
Shower Head Holder, Adjustable Removable Shower Wall Bracket, Shower Head Mount, 360° Rotation Adjustable Shower Bracket, Angle Adjustable Vacuum Suction Cup (Sliver-1)
Super Vacuum Adsorption Extra strong suction cup, reusable design, does not slip down the wall tiles. Our suction cup shower head holder withstands a weight of 2.5 kg. The suction cup has a diameter of 7 cm, which has superior flexibility and good air tightness. It is moisture resistant and waterproof and has a long life.
Check price
DERW Shower Slide Bar, Shower Riser Rail 70cm with 5 Modes Shower Head(Without Taps), Height-Adjustable, 360° Rotatable, Corrosion-Resistant, Built-in Filter, Durable for Your Shower System
Five-in-One Functionality Transform your shower into a spa-like retreat with our multifunctional shower head featuring five distinct settings. Enjoy a soothing rainfall or invigorating spray with liquid silicone nozzles that make cleanup a snap, giving you a refreshing experience that feels just like nature's gentle touch.
Check price
BBLIKE Shower Head Holder - 19-22mm ABS Adjustable Shower Holder Bracket, Universal Shower Head Holder Replacement for 18-25mm Slide Rod, Shower Head Accessories Parts, Chrome Plated
Durable and High-quality Material The shower head holder is made of high-quality ABS plastic and chromium alloy material, rugged and durable. It is finished with chrome plating for a beautiful shiny surface for longer durability, and not easy to get rusty.
Check price
Ibergrif M20802 Shower Riser Rail, 60cm Shower Rail, Wall Mounted Shower Rail kit with Soap Dish Bracket Adjustable Shower Head Holder Bar, Shower Slider Rail for Bathroom, Chrome, Silver
Adjustable shower head holders The shower pole equips with a hand shower bracket which can be smoothly slide up and down the shower bar rail with a push of a button. Adjustable height and spray angle will easily access to no matter for adults or children for the best showering experience.
Check price
AHRLIC Shower Head Holder, Adjustable Shower Holder Bracket for 18-25mm Diameter, 360° Rotating Detachable Shower Riser Rail Slider, Bathroom Replacement Clamp
EASILY ADJUSTABLE Our shower bracket is suitable for round sliders with a diameter of 18-25mm. Easily adjust the shower height to ensure that every family member can enjoy a comfortable and personalized shower experience.
Check price
Tenbrachian Universal Adjustable Shower Head Fixing Replacement for 18-25mm, Shower Riser Rail Slider with Hook, 360° Rotation Shower Head Fixing Parts for Slide Rod(Black)
Easy to Install, Hook Design No tools are required, and no disassembly is required, easy to install, saving your work and time, and providing you with a good shower experience; Designed with hooks, you can easily hang toiletries such as bath balls, brushes, shower caps, etc
Check price
Shower Head Holder for 19-25MM Riser Rail Adjustable Shower Rail Rod Clamp Holder Bracket Chrome Plated
Adjustable Design This shower holder is suitable for an 19-25 mm diameter round pole, and you can adjust the height easily without any tools.
Check price
Adjustable Shower Bracket, No Drilling Slip-On Design Shower Head Holders, 360° Angle Adjustment Holder Accessories Fits 4 Rail Sizes (18x30, 22x22, 25x25, 30x15mm)
Zero Damage Installation Slide this shower rail holder onto existing pipes in 15 seconds - no drilling screws required. Perfect shower head holder no drilling.
Check price