Flush Valve Seal for American Standard 2 Pack Upgraded Silicone Material Replacement 7301111-0070A for American Standard Champion 4 and Eljer Titan 4

Show on Amazon

Offer

Product description

  • The flush valve seal can fix leaks and prevent ghost discharges from occurring. The outer diameter is 4 1 4" and the inner diameter is 2 3 4".
  • Installation Steps 1. Turn off the water supply and drain the tank. 2. Unscrew the black nut without disconnecting the chain. 3. Remove the O-ring from the black nut and remove the green top cover with the gasket. 3. Replace the old gasket with a new one. 4. Lift the pole with the bottom cover and place the top cover with the gasket at the top, turn to the right until nested. 5. Screw the black nut back until you hear two clicks and let the post slide back into place.
  • Comes with 2 flush valve seals to meet your daily use and replacement needs. Our product can save you time and money.

You might also be interested in these flush valve nuts.

© 2025 WHICH.ONE. ALL CONTENT IS SUBJECT TO OUR COPYRIGHT.