44 Pin 2.5 IDE Male to Male Adapter 44p 44pin Dom to USB Adapter 44Pin Card IDE 44 Pin Male to IDE 44 Pin Male Hard Drive Adapter

Makes SD MMC flash memory card be a super compact, cost efficient, anti-shock, low power consumption, no acoustic noise and fast access time HDD.

The SD Card to 2.5 Inch IDE Adapter Adapt SD MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.

Works with all laptops equipped with a 2.5" IDE port,

7+15PIN SATA hard drive to IDE interface, you can let your new 2.5-inch serial hard drive to the old IDE motherboard, easy to use, if you want to install 2.5-inch serial hard drive on the old motherboard machine, it is the best select.

This allows you to connect an electronic disk only female header to other normal computers to organize internal data

USB2.0 interface, 480 Mbps high speed data transfer rate. 52X CD-ROM Supported. Supports Hard Disk, CD-ROM, DVD-ROM, CD-RW, Combo Device and DVD-RW to computer with USB 2.0 interface One IDE 40 Pin Port for internal CDRW, DVDRW, CD Rom, DVD Rom, 2.5" 3.5" Hard disk, COMBO device and etc

Converts Parallel ATA (PATA, ATA, IDE) to Serial ATA (SATA)

Wide Compatibility FIDECO SATA and IDE adapter can support 2.5 and 3.5 inches SATA HDD; 2.5 inches SATA SSD; 2.5 and 3.5 inches IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW.

SATA to IDE converter supports 48-bit Logical Block Addressing (LBA) and SATA I II III (1.5 3 6Gbps) drives

Works with all IDE 40Pin Drives up to 1000GB , Supports IDE 66 100 133MB s

Designed with compatibility in mind, our adapter supports both Type I and II Compact Flash cards, as well as Microdrive Compact Flash cards. Whether you have an older laptop with an IDE slot or a modern mini-ITX device, our adapter is the perfect solution.

Compatible for More - The IDE to SATA Adapter can read & write 3 hard drives simultaneously; work for 2.5-inch, 3.5-inch SATA HDD SSD, IDE HDD and other 5.25-inch CDs DVD Drives.

IDE 44Pin Disk to SATA Female Converter Adapter PCBA for Laptop & 2.5" Hard Disk Drive 2.5 inch IDE 44Pin SSD or HDD Drive to SATA converter Board

Turns SATA IDE drive into a convenient external drive, could be used as a bridge to connect SATA 3.5" hard disk,2.5" & 3.5" IDE hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to computer with USB 2.0 interface (Not Suitable for 2.5" SATA HDD).

The host PC will identify the inserted CF as standard 2.5" IDE HDD

SD to 3.5" 40Pin IDE Adapter,Convert SD, SDHC, MMC to an IDE-compatible hard drive.Support PIO, multi-word DMA and super DMA data transmission mode. high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.Ideal for some devices that required a fast and easy bootable device such as POS.

Dimensions 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) . 2.5 inch IDE 44Pin SSD or HDD Drive to SATA Female Converter Board PCBA

IDE Device Enhancement Our SDHC SDXC memory card converter seamlessly integrates with IDE 2.5" interfaces, offering expanded storage solutions for an array of devices. It's the perfect upgrade for ensuring compatibility and extending the functionality of your electronics.

Great Compatibility FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer or offline clone - IDE Source+SATA2 Target; SATA1 Source+SATA2 Target. Please note that for data transfer or offline clone, IDE Source and SATA1 Source cannot be connected simultaneously.

Application Laptop hard disk, compatible with Dell, compatible with Sony, compatible with IBM, compatible with Toshiba, compatible with HP, compatible with Compaq, compatible with Fuji, etc.