iHTP Fan Hub/Splitter Controller 12V 4Pin PWM & 5V 3Pin ARGB 2-in-1 Total 16 Ports, SATA Power, Hidden Magnetic Base(Black)

Supports 12V RGB 5V ARGB motherboard synchronization by switching a small switch to synchronize two lighting systems, compatible with AURA, RGB Fusion, Mystic Light and Polychrome. There is no built-in color mode, and the sync cable must be connected to the motherboard head.

Wireless Remote Control Wireless remote control switch can freely switch between host mode and remote control mode, and easily adjust fan speed (S M H) lighting effect brightness LED speed with one button without opening the case.

EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots

Multiple Interfaces - Up to 9 sets of Addressable RGB (3pin) and PWM headers to expand your system by been able to connect more devices. With PWM temperature control and AURA Sync interface the GameMax V4.0 PWM ARGB Hub helps you build a system with strong heat dissipation and vivid LED lighting.

Size 133*48*14.3mm(5.24*1.89*0.56in).

The twoinone controller is equipped with a remote control, a mainboard synchronization cable, and a control cable temperature. If the motherboard does not support synchronization, you can use the remote control and do not need to connect the synchroniz

Fan speed can be adjusted by PWM signal from motherboard, only the speed of "Fan 1" can be read by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM.

High performance cable management Product for the ARGB lighting signal hub, while supporting the installation of 10 ARGB fans, each side of the five lighting interfaces, a plug available, can keep the ARGB fan lighting cable line neat (Note does not support 12V 4PIN RGB interface devices, can not be inserted)

Master 1 To 6 Multi Way Splitter 5V 3PIN RGB Case Fan Hub Adapter PWM ARGB Addressble Fan Power interface SATA

Optimised Sickle Blade - 120mm fan with improved blade curvature which provides superb aerodynamic efficiency with excellent air flow( Up to 52.91 CFM) and air pressure( Up to 1.75mm H2O).

Main functions of ARGB PWM 2-in-1 8 way hub expand 8-way 4-pin fan and 5v3-pin ARGB interface to solve the problem of motherboard fans Solve the problem of insufficient number of interfaces and focus on solving the problem of messy fan cables

This is ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color)

Size 133*48*14.3mm(5.24*1.89*0.56in).

Two interfaces on the left, the one on the left is the light 5V ARGB motherboard synchronous interface, if you want to use the synchronous direct connection, press the MB key on the remote control for 6 seconds to adjust the synchronization; the one on the right is the FAN running at full speed when the motherboard temperature control interface is not connected, and the motherboard controls the speed after being connected, it is recommended to connect the CPU FAN interface.

SIMULTANEOUS EXPANSION The 10 way 5V RGB splitter hub can expand any 5V addressable RGB product at the same time while occupying only one RGB connector on the motherboard, freeing up more ports for other devices.

6 Port hub

Astonishing lighting effects-Tri-aperture inside and outside luminous light effect,Give out an impact visual light effect.

ARGB PWM 2-in-1 6 way hub. Up to 6 sets of Addressable RGB (5V 3pin) plugs and PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 6 way fans, ARGB is all synced between all fans, one setting applies to all fans (speed and color).This CPU Cooling IDE Hub is powered by IDE 4PIN, which can simultaneously supply power to the fan and 5V 3 pin ARGB products. The motherboard has no power supply burden and can maintain a stable output even at full load.

BACK ADHESIVE, ACRYLIC COVER ARGB PWM Hub PCB board has adhesive back side for easy sticking on flat area, clear acrylic cover can block most of the dust.

SHAKING TANK 2in1 PWM & ARGB fan hub contains 9 5v-3pin Aura SYNC Addressable RGB ports and 9 4pin PWM ports whiches simultaneously power maximum 9 ARGB-PWM fans in total to offer combo fan solution for PC building,SATA power maintains stable output even at full load.