TrustWheel 12V Black Dimmer Switch, DC12V-24V Double Dimmer Light Switch, 120W 5A PWM RV LED Dimmer Switch 2Gang Rotary RV Light Switch for 12V LED Lights in Motorhome/RVs/Campervan/Boat/Truck

APPLICATIONS- Typically used for lights in RVs, campers trailers, boats, cars, marine, trucks, vans or any dimmable DC 12V LED lights, strip lights, awning lights, etc

PWM dimmer-optimal dimmability Using VIPMOON 12v dimming switch, noiseless and flicker-free during dimming, 3% 100% dimming range, smooth dimming, accurate dimming, turn the knob to adjust the light to protect your eyes

STBTECH

Motorhome Dimmer Switch The 12V dimmer switch campervan adopts high side PWM dimming, without noise and flashing. Please use panel installation to avoid installation and switch issues in the future

Smart Touch Switch Just Short Press To Slowly Turn The Led Lights On And Off Long Press To Dim And Control The Light Continuously It Has A Memory Function, When You Turn On The Light Again, The Light Brightness Is The Same As The Last Time Automatically (Automatically Reset After A Power Failure).

The touch dimmer switch is an electrical switch, made of ABS Plastic shell. For home lights, such as table lamps, ceiling lights.

Wide Application Trailing edge dimmer switches for 12-24V 8A 0-196W dimmable LED lights (including single-colour LED strip lights), LED floor lamps, halogen lamps, incandescent lamps, etc. and 12V-24V 5A 0-120W fans and motor rotation speed control. Note This dimmer switch is only suitable for low voltage lamps (12-24V), not for high voltage lamps (220V 240V)

Adjust the light soft and stable, no flickering.

Excellence design LED light strip remote control dimmer switch. You can remotely turn ON OFF light with the relay receiver through the remote control. And as a voltage regulator, it is a adjustable switch, which the adjustable duty cycle is 0%-100%.

ADJUSTABLE BRIGHTNESS Achieve soft, stable light with 0-100% adjustable brightness, no flickering.

USB QC 3.0 QUICK CHARGE & MEMORY FUNCTION Campervan led dimmer new upgrade, add USB port, QC 3.0 3-12V, 24W Max, support fast charging. Memory function When you turn off the lights and turn them on again, it will keep the last dimmer setting.

Durable Full Aluminum Material - The push button dimmer is manufactured from machined aluminum and additional aluminum face plate with texture finish

Note If the switch doesn't work at first time, pls cut off power and operate again. The chip inside will start a protection procedure when a long time stop working

Applications- Typically used for lights in RVs, campers trailers, boats, cars, marine, trucks, vans or any dimmable DC 12V LED lights, strip lights, awning lights, etc.

A type of dimmer switch widely used for controlling the brightness and the flash of single color LED strip in the home indoor areas.

The LED dimmer is designed with ABS plastic, which is very durable and insulating. Knob operation controls 0% - 100% dimming, no flicker at low brightness, no rapid changes, avoiding visual impact on eyes caused by instantaneous changes in brightness.

Touch Control The dimmer switch is switched in touch mode, no mechanical wear and tear, and the static power consumption is less than 1W. If you use it, you can achieve non-directional color control over a large distance by simply touching the corresponding button with your finger.

Smart touch control short touch to turn on, touch again to turn off, long touch for stepless dimming. It has a memory function, when you turn on the light again, the light brightness is the same as the last time automatically. (However, it will automatically reset after a power failure).

-----Input Voltage 12V 24 V DC Output 1 channel Output current

Connector Specifications The dimmer switch features a DC 5.5x2.1mm male-to-female connector, with a total cable length of 30cm.