WITEN&NOCK 80 cm, set of 2 shower seals, replacement seal for shower cubicle, water deflector sealing profiles, shower door seal, glass thickness 8-10 mm

Product description

• 2 x 80 cm. With this model, the glass thicknesses of 8 - 10 mm are available. The profile has double sealing lips at the bottom. The lip length in approx. 5 mm is suitable for narrow gaps to the floor. The water repellent lip on the side of 20 mm protects against splashes of water. It is recommended for the dryness of a floor-level shower.
• These shower door seals are universal for all manufacturers of glass showers of all kinds, especially for better sealing for frameless shower partitions such as swing doors, swing doors, folding doors etc. predestined. The sealing profile can be easily attached from the bottom after cleaning the glass. You do not need to stick it with silicone.
• After removing your old seal and cleaning your shower door, the replacement seals can be attached horizontally to the lower glass edge as a water repellent profile or splash protection profile. Each sealing profile can be easily shortened to the desired length with a Puk saw, fretsaw or a cutter knife.
• The spatial wet and dry separation is reliably ensured and a risk of slipping is thus reduced. In addition, our shower door seals are mould resistant and hygienically easy to clean. It is worth replacing the shower cubicle seal or bath seal. Enhance your bathroom and shower with our seal not only functionally, but also visually.