Loufy 12Pcs 20Mmx140Mm Film Heater Plate Adhesive Pad,PI Heating Elements 24V 72W Strip Heater Adhesive Polyimide Heater Plate Easy Install

Heating wire structure silicone single core spiral heating wire

Application Scope --The 3D printer silicone heating pad is equipped with a built-in 100K thermistor, a 60cm long wire, a power of 60W, and a working voltage of 24V. Silicone heated pad is not only perfectly compatible with voron 0 and 0.1 3D printers, but also suitable for all kinds of DIY projects.

Rubber Hot Bed Low power, high temperature, uniform heat transfer, long life, and high thermal efficiency conversion.

The flexible polyimide heater films are widely used in constant temperature, heat preservation, heating, and other industries where you need temperature control and these work great paired with a thermistor.

High temperature resistance The limit temperature of the silicone heating plate is about 200 degrees (the temperature of the silicone material is temperature resistant), and the heating plate is easily burned if it exceeds.

Even Heating Built in rubber silicone, excellent heat source, more even heating on the whole .

POWER SUPPLY Heating pad is convenient to power, just connect it to USB port of computer, power bank, or power adapter of 5V, 2A. If the USB output interface used does not reach 2A, the switch cannot be turned on.

Equal temperature safe and reliable.

Intelligent Cycle Control Adjustable delay start (OPH) prevents frequent cycling, protects equipment from rapid on off switching

The flexible polyimide heater films are widely used in constant temperature, heat preservation, heating, and other industries where you need temperature control and these work great paired with a thermistor.

The flexible polyimide heater films are widely used in constant temperature, heat preservation, heating, and other industries where you need temperature control and these work great paired with a thermistor.

The flexible polyimide heater films are widely used in constant temperature, heat preservation, heating, and other industries where you need temperature control and these work great paired with a thermistor.

The flexible polyimide heater films are widely used in constant temperature, heat preservation, heating, and other industries where you need temperature control and these work great paired with a thermistor.

The flexible polyimide heater films are widely used in constant temperature, heat preservation, heating, and other industries where you need temperature control and these work great paired with a thermistor.

Rubber Hot Bed Low power, high temperature, uniform heat transfer, long life, and high thermal efficiency conversion.

Product Specifications --- Material carbon fiber heating material; heating pad size(length x width) approx. 8.5x6.5cm 3.3x2.6in; wire length approx. 15cm 5.9in; input 5V, 5A; power 7W.

Waterproof Switch The premium waterproof coating is even and full, and the waterproof effect is better. Press and hold for 3 seconds to turn on, touch to , long press for 3 seconds to turn off.

EXCELLENT PERFORMANCE This silicone heating pad uses silicone rubber and fiber fabric with excellent performance, is resistant to high temperatures of 200 C and can work for a long time at temperatures up to 150 C. Nickel alloy resistance wire is safe to use, with good distribution density , uniform heating, durability and no short circuit.

With Terminals This thermal resistance wire and heating pad has terminals, and the cable length with terminals is 95mm, which can be used in most printers.

Heating films can not control the temperature itself. You can use it with a temperature controller.