2 Pcs 6 Inch Heavy Duty Adjustable Pipe Bracket,Heavy Duty Split Ring Pipe Hanger,Adjustable Pipe Bracket Clamp,B Vent Adjustable Wall Strap Round Gas Vent Pipe Strap,With Mounting Screws, ETTH541
Show on Amazon
Show on Amazon
Offer
i
£ 42.18
free shipping | 1-2 Days
go to shop
Product description
- The open ring hanger , which is not easy to deform, and the surface is galvanized, suitable for long-term use, and can serve you for a long time
- Please check the product size information before purchasing, as shown in the picture, the metal pipe bracket is mainly used to fix pipes, plastic ventilation pipes, chimney pipes, drainage pipes, and can also be used to install various types of pipes to fix pipes firmly and reliably
- Widely used and can be installed on walls, ceilings, sides of houses or buildings, and even more, the pipe clamp is suitable for 6 inch round pipes
- You can get 2 pieces of 6 inch split ring tube hangers, if you have any questions or suggestions, please contact us in time, your satisfaction is our top priority
You might also be interested in these 6 inch pipe clamps.
Voarge 4 Pieces Adjustable 304 Stainless Steel Duct Clamps Hose Clamp, 6 Inch, Home Worm Drive Gear Gas Water Pipe Ducting Clamp for Flexible Hose Tube, Adjust Diameter 141mm-165mm
Material Made of quality and premium heavy duty 304 stainless steel material, instead of inferior steel. Solid and sturdy, corrosion resistant and rust free, can be recycled and reused for a long time, will not rust for long-term use
Check price
MIAHART 6 inch Hose Clips 304 Stainless Steel Duct Clamps Pipe Clamps Adjustable 141mm-165mm Hose Clamp (Pack of 6)
Material made of 304 stainless steel, corrosion-resistant, will not rust for long-term use
Check price
4Pcs 141-165mm Hose Clips Adjustable 304 Stainless Steel Duct Clamps Hose Clamp Pipe Clamp Air Ducting Clamp Worm Drive Hose Clamps
More Sizes Available 52-76mm 65-89mm 91-114mm 118-140mm 194-216mm, etc. ; check out our shop for other available sizes.
Check price
6 Inch / 160 mm Pipe Clamp - Galvanized Pipe Hanger - 6.3 Inch Conduit Mounting Clamp - PVC Tube Brackets - Metal Pipe Clamps - Tube Wall Mounting Bracket Clamp - Rigid Conduit Holder - 6In Pipe Clamp
Holds the pipes firmly and securely, prevents them from moving freely or spinning.
Check price
sourcing map 6Pcs 150mm(6") Cable Clamp, Rubber Pipe Strap Rubber Cushioned 304 Stainless Steel Hose Clamp U Shape Metal Clamp Tube Holder for Tube Pipe Wire
Metal Material - The cable clamp is made of good strength 304 stainless steel material with a polishing finish and rubber cushioned, durable and stable, not easily to rust or corrosion in harsh environments, and can be applied for a long time without deformation.
Check price
4 Pcs Hose Clips Adjustable 304 Stainless Steel Hose Clamp ø150mm/6" Dunting Clamps for Securing Hoses and Pipes Tube (4pcs 141-165)
Premium Quality These hose clamps are all made of premium heavy duty stainless steel material.Sturdy,strong and durable steel clamps are salt resistant, anti rust, anti-corrosion, waterproof and oil-proof.
Check price
InduSKY 6Pcs 4 inch 5 inch 6 inch Hose Clamp Set 304 Stainless Steel Duct Clamps Worm Gear Adjustable 91-165mm Range Hose Clamp Fuel Line Clamp for Automotive and Mechanical Applications
3 Sizes Large Hose Clamp - With this set you have 4-6 inch sizes. Our set contains 6 stainless steel clamps in 3 different sizes, each with 2 pieces of the clamping ranges 91-114mm, 118-140mm, 141-165mm, and a bandwidth of 12 mm.
Check price
6" (159mm - 166mm) Rubber Lined Munsen Rings Pipe Clamps Pipe Hanger Anti Vibration Clamp, Bracket - (Pack of 2)
M8 Fitting
Check price
Sourcing Map 2 Pcs Adjustable Pipe Bracket Clamp, 6.3-6.6" (160-168mm) Wall/Ceiling Mount Pipe Hanger, Galvanized Iron, Black
What You Get - Package content comes with 2 pcs of adjustable pipe bracket clamp with screw and expansion tube. The following size Fit Pipe Outer Diameter 160-168mm 6.3-6.6inch; Bracket Width 20mm 0.79inch; Bracket Thickness 2mm 0.08inch; Screw Size M8 x 80mm; Expansion Tube Size M10.
Check price
Jones Stephens R60-100 Pipe Repair Clamp, 1" X 6"
Dia in 1
Check price
PATIKIL Split Ring Pipe Hanger, 6"(150mm) Zinc Plated Iron Adjustable Wall Mount Ceiling Mount Pipe Bracket Support Clamp for Plumbing HVAC
Notice Avoid over-tightening the clamps, as this can cause damage or distortion to the connected components
free shipping
Check price
Hon&Guan 150mm Flexible Ducting 3m Aluminum Foil Insulated Heat Ducting Hose 6 Inch Ducting Pipe with 2 Clamps for Extractor Fan, Dryer Vent, Cooker Hood
Multi-Layer Protection 150mm duct make of multi-ply aluminum foil laminate that encapsulates a high density, corrosion resistant wire helix - constructed to replace inferior vinyl ducts.
Check price
Water Pipe Repair Clamp for 6 inch Pipe(OD of The Applicable Pipe is About 6.5 inch),Leak Sealer for Pipes and Plumbing,Length 11.8 inch,Suitable for PE,PPR,Iron and Steel Pipes
The outside diameter of a 6 inch pipe is not 6 inch,please check the details of the item.Pipe Repair Clamp is composed of 2 steel plates,2 rubber liners for sealing and 12 bolts.Working pressure up to 1Mpa(10 bar).Compared with other pipe repair clamps,it has better sealing effect and higher pressure,and both sides are connected to make the pressure more even.This is a big pipe clamp, please read the description, check its size and the space around your pipe.
Check price
Sourcing Map 5pcs 6 Inch 150mm Conduit Clamps, U Pipe Clamp, Stainless Steel, Silver
Size - The conduit clamps measure a fastening diameter 6" (150mm), inner width 151mm, band width 18mm, clamp thickness 2mm, screw mounting hole diameter 6mm.
Check price
H&C VENT Duct Pipe Clamp Hose with Rubber Sealing - Insert │Air Ventilation Mounting Bracket│Round Ducting Exhaust Holder│for Metal Plastic PVC Aluminium and Draining Pipes (Ø 160 mm / 6.3")
Standard Size This Pipe Clamp is a great fit for wide range of indoor and outdoor use and has compatibility for ventilation systems with 160 mm pipe and duct diameters. Uses M8 and M10 threaded connections (dual thread - can be used with M8 and M10 metric screws). Includes two screws, making it ready to use solution for your mounting needs and rubber inserts for better fitting and anti vibration.
Check price
6" Inch Ducting Clamp - 20 Pieces of Adjustable Stainless Steel Duct Hose Clamps with Worm Gear - Wide Diameter Range Fastener for Flexible Ducting (Pack of 20)
Package includes 20 pieces of metal hose clamps, fits hoses and flexible ducts from 1.96 diameter up to 6.50 Inches. Band width 0.35" Inches.
Check price
sourcing map 4 Pcs Adjustable Pipe Bracket Clamp, 6"(152mm) Wall Ceiling Mount Split Ring Pipe Hanger Galvanized Iron Pipe Strap Support with Screw & Expansion Tube for Pipe Tube
What You Get - Package content comes with 4 pcs of adjustable pipe bracket clamp with screw and expansion tube. The following size Fit Pipe Outer Diameter 152mm 5.98inch; Bracket Width 20mm 0.79inch; Bracket Thickness 2mm 0.08inch; Screw Size M8 x 80mm; Expansion Tube Size M10.
free shipping
Check price
10 Pcs Pipe Clips 60mm,Caianwin Pipe Clamp Stainless Steel 304 Pipe Strap Clamps for Installing Gas,Qater or Hose Pipes
-10 Pcs U shaped brackets for 60mm diameter pipes.
Check price
Sourcing Map 6 Pcs Adjustable Galvanized Iron Pipe Bracket Clamp, 6" (152mm) Wall Ceiling Mount Pipe Hanger with Expansion Tube
What You Get - Package content comes with 6 pcs of adjustable pipe bracket clamp with screw and expansion tube. The following size Fit Pipe Outer Diameter 152mm 5.98inch; Bracket Width 20mm 0.79inch; Bracket Thickness 2mm 0.08inch; Screw Size M8 x 80mm; Expansion Tube Size M10.
free shipping
Check price
Pipe Clamp, Ultra Clamp, 2 to 6 in
Operating handle repositions for close work
free shipping
Check price